Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 40 of 80

Thread: Wheel discussion (From 818 Open House Pics Thread)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Senior Member Frank818's Avatar
    Join Date
    Jun 2013
    Location
    QC, Canada
    Posts
    5,732
    Post Thanks / Like
    Ok so my thinking was right.
    I can't believe RaceLogic wouldn't allow a diameter difference, it's widely used for various applications, they certainly cannot impose same size everywhere. Another thing I'll try to confirm.

    Duh, well after googling around I found a post from 2004 that says RLTC uses tire size setups, tire diameters and car speed to figure out if the wheels spin over your pre-set allowable slip %.

    Some people changed tire front and rear for street vs track and it changed the proportional setup without causing any issues. But it is configurable.




    Note to self for later % difference calculations: 255/35-18F and 285/30-18R street vs 245/45-17F and 275/40-17R track, no difference in RLTC management.
    Last edited by Frank818; 06-24-2013 at 03:08 PM.
    Frank
    818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
    Go-karted Aug 5, 2016 - Then May 19+21, 2017
    Tracked May 27/July 26, 2017
    Build time before being driveable on Sep 27, 2019: over 6000h
    Build Completed Winter 2021

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

FFMetal

Visit our community sponsor