Visit our community sponsor
Thanks:
0
Likes:
0
-
Confused - Engine Harness
I was in the process of working on the wiring, and after I planned to take the harness to the car, I noticed something odd. Note I bought a donor pallet, and did not get the engine that came with the rest of the car because of a mix up, but was assured it was an 06 turbo like the one I ordered. The engine is an 06 turbo.
The engine wiring harness has a plug that does not match up to the harness I have. See Picture. Using the wiring guide "WI Wiring Sys.PDF" it appears this plug is for an 2006+ NA engine.... Page 55, plug b21. Can some on confirm this issue or help guide me. I will admit I am tired from multiple days of working on the wiring..... Thank you in advance for any help.
IMG_20131229_111353.jpg
-
PLATNUM Supporting Member
I would get in touch with the people you bought the pallet from If it was me.
-
That is definitely not from an '06 WRX. IIRC, the '07+ WRX/STI went to that style plug.
-
Thank you for the quick replies. I have emailed them about this.
-
818 builder
07 wrx engine harness, so it does not match a 2006 or older
-
Thanks, any thoughts on if I have to replace the engine harness with an 06? Any differences with plugs on the engine, etc? ...
-
Administrator
The 06 harness is nearly the same as the 2005 harness, the 07 is completely different on the engine plug.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor