Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Fuel Pump Hanger
I've just about got the fuel pump ready to drop into the tank but had a quick question. One of the hardlines that comes down from the pump hanger has this orange/brown cap on it. Are we supposed to remove that or leave it as is? The manual shows it ready to install with that cap in place but I don't trust the manual.
See picture:
-
Senior Member
Originally Posted by
metros
I've just about got the fuel pump ready to drop into the tank but had a quick question. One of the hardlines that comes down from the pump hanger has this orange/brown cap on it. Are we supposed to remove that or leave it as is? The manual shows it ready to install with that cap in place but I don't trust the manual.
See picture:
Leave it there. It is like a check valve. it will open up to let fuel back in the return line.
Bob
-
Senior Member
Damnit. I worked ahead and figured I'll just switch it to the outside end of the hardline and remove it later if that's what I'm supposed to do. Never anticipated that it would work like that.
Fortunately I trimmed enough of the hanger to allow it to fit in without too much wrestling.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor