BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: Wanted: New Coupe Builders

  1. #1
    Junior Member
    Join Date
    Feb 2011
    Location
    Lady's Island, SC which is about 45 minute from Hilton Head Island
    Posts
    13
    Post Thanks / Like

    Wanted: New Coupe Builders

    I have been on the fence about rebuilding my wrecked Coupe.

    My body is pretty much healed and I have made my decision not to rebuild based on the quotes I got from FFR for replacement parts.

    I have not only decided to sell the Coupe but, also my tilt bed Serpent Express trailer.

    Thought I would test the waters here on the forum to see what the interest level might be.

    This was my build description on this web site:

    INFO: Chassis Number F5R1000217CP.This is a complete ground up build. All new parts build with not one single donor piece in it. The drive train consists of a Coast High Performance 430HP/410FP torque, blueprinted and balanced 347 stroker motor with forged crank, pistons and rods, roller cam and rockers, full main girdle, windage tray, Edlebrock aluminum heads and Victor Jr. intake, a Holley 4150 dual pumper 650 cfm carb, MSD billet distributor and AL6 electronics plus high output coil. Tremec TKO 600 Ford road race 5 speed, McCloud safety bell housing, 5-Link watts rear end setup. The brakes are a combination of 13” Ford Cobra and Wilwood. The wheels are the well known Halibrand 17X9 Cobra III with the tires being Nitto NT 555 RII DOT legal road race and for track days FFR allow wheels with Avon Tech R P275/40ZR17 tires. The interior is made up of Autometer gauges, Wilwood pedals with cockpit adjustment, Kirkey aluminum racing seats and is fully insulated and carpeted to reduce heat and noise levels.

  2. #2
    Senior Member riptide motorsport's Avatar
    Join Date
    Feb 2011
    Location
    Fort Lauderdale Fl.
    Posts
    3,296
    Post Thanks / Like
    What's left of it, what's it need and how much do you want for it? Steven
    FFR Daytona Type 65 Coupe
    67 427 Cobra
    57' Belair
    72 Pinto Wagon ,306" 1/4 miler
    34 5 window coupe Ford
    2003 Mustang GT
    99' ZX9
    85 Goldwing

    All toys still in the Scuderia!


    Every Saint has a past..................every sinner a future

    Don't take yourself so seriously........no one else does.

    You never see a motorcycle parked outside a Psychiatrists office.

  3. #3
    Junior Member
    Join Date
    Feb 2011
    Location
    Lady's Island, SC which is about 45 minute from Hilton Head Island
    Posts
    13
    Post Thanks / Like
    Steven,

    Everything is left except the front right side of the frame. The A arms are bent and the Koni DA shock shot, but the spindle, sping & rotor as well as caliper is good.

    The rims and Nito tires are good as they were not on the car.

    So for everything you see on the list above plus a really awesome enclosed low drag towing trailer I am looking 12K.

    Rob

  4. #4
    Junior Member
    Join Date
    Apr 2011
    Location
    Downers Grove, IL
    Posts
    5
    Post Thanks / Like

    Photos

    Hi Rob,
    I am interested.
    Do you have any Photos of the car, both before and after the accident?

    Gene

  5. #5
    Superannuated Member
    Join Date
    Feb 2011
    Location
    Virginia
    Posts
    99
    Post Thanks / Like
    PM Sent.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor