So I wasn't too fond of taping or gluing the turn signal cancel piece to enable that functionality with the NRG hub I purchased.


So I designed a simple part that can be 3D printed. BTW, anyone know what the 3 relief cuts in the hub are for?


The fit is tight and it definitely feels like it won't come loose. I had to knock it in with a mallet to seat it on the NRG hub. Not too bad of a fit, but I did have to space it out a little to get the right depth to disengage the turn signal. This photo is with the adapter all the way down. I actually need another 0.175" length which I've updated the design to accommodate for in case I need to print another one.


You can see the gap in this picture ... along with some tool marks to prop it up. It is a tight fit after all. The interference fit alone is very tight so I feel it doesn't need anything more. Any suggestions?