A couple of things I need to clear up in my 68-year-old cobweb of a brain.

Here's a pic of the trunk opening. It looks like there's an extra lip that maybe FFR forgot to tell the robot to trim. Shall I cut off the entire lip at the orange line or leave a little by cutting at the silver line, which is basically in the radius?

Trunk Lip.JPG

The hood has a vertical flange all around the opening, but right where the opening crosses the driver footbox, there's a cutout that looks like it should provide clearance for the footbox top. It's a little out of position. Do I just extend the relief or cut the entire perimeter to make it uniform?

Hood lip.JPG