Almost done with the wiring except,,,,,,,

[palomino]

The donor is a 2004 WRX.
My car starts & runs.
All lights and directionals work except the 4 way flashers. Not sure why. (any ideas?)
I have a few connectors that I can’t identify even after looking at the wiring diagrams and pictures in this forum.
Need some help so that I can finish wiring and install the shift linkage so I can get to go cart.

Connector 1 view A&B
Connector 2 view A&B
Connector 3 view A&B&C
Connectors 4 view A&B


Connector 1
Connector 1-A.JPGConnector 1-B.JPG

Connector 2
Connector 2-A.JPGConnector 2-B.JPG

Connector 3
Connector 3-A.JPGConnector 3-B.JPGConnector 3-C.JPG

Connectors 4
Connectors 4-A.JPGConnectors 4-B.JPG

[Hindsight]

Flasher button is not the button on top of the steering console (if thats what you are trying to press)

[palomino]

Flasher button is not the button on top of the steering console (if thats what you are trying to press)

Not the one on the top of the steering column, I finally figured that one out. This is the 4 way that that you push on then push off.

[palomino]

I have the 4 way flashers working. Now it is just trying to figure out if I can delete these connectors.
Connector 3 looks like the plug labeled "Rear O2" in one of the posts but I have 2 sensors already plugged into the exhaust system.
Are there 3 sensors?

[rtz]

Can they be traced back to a fuse or pinout? Maybe a "fox and hound" could work?

http://www.triplett.com/shop/fox-hound/

http://www.homedepot.com/p/Triplett-...3399/203345750
http://www.amazon.com/Triplett-3399-.../dp/B001ULPREW