Factory Five Roadster MkIV Complete Kit For Sale

[JeepFlyer]

Factory Five Roadster MkIV Complete Kit - SOLD

This kit was delivered in August 2012, and has about 200 hours of work completed. Extensive upgrades were included in the original purchase, as well as additional parts along the way. Approximately 75% of the sheet metal work is finished, with only the area behind the cockpit remaining. No panels have been riveted yet, but all holes are drilled and deburred. The front F-panels are powder coated black, as well as the radiator fan shroud, CNC triple reservoir, and engine compartment battery box. The kit has the upgraded IRS setup, and is currently a rolling chassis, with wheels and tires as listed below.

The plan was to put a coyote engine in this kit, therefore many of the parts in preparation for that are included. The engine and transmission were delayed as to not waste the warranty period until the kit was ready to accept them. The brake lines are run and the uprgaded Wilwood brakes are assembled and mounted. The power steering rack and pinion and the power steering pump are mounted. The fuel pump and fuel level sender are mounted in the tank, with the fuel lines ready to be mounted. A full listing of all parts and upgrades is included below.

Standard Width IRS Upgrade
17” × 9” / 17” × 10½“ Vintage Halibrand Replica Wheels
Nitto 555 Extreme 315/35R17 & 275/40R17 Tires (mounted)
12.88” Front Wilwood Brake Upgrade Kit
12.19” IRS Wilwood Brake Upgrade Kit
Forte Upgraded Aluminum Rear Differential Housing
Forte Torsen T-2, 3.55 Ratio Differential Upgrade
Forte IRS Knuckles & Hubs
Durolast Rack & Pinion (2.5 Turn)
Forte Offset Steering Rack Mounts
Fast Freddie’s Electric Hydraulic Power Steering Pump
Sidepipes Ceramic Coated Black
Breeze Aluminum Fan Shroud (Powder Coated Black)
Breeze Engine Compartment Battery Box (Powder Coated Black)
CNC Triple Reservoir (Powder Coated Black)
Billet Specialties Power Steering Reservoir
Billet Specialties Radiator Overflow Tank
Wind Wings Kit Add-on
Herb Fraser Carbon Fiber Door Panels
Speedhut GPS Speedo, Tach, and Quad Gauges
Two buckets of Lizard Skin Ceramic Coating w/ Sprayer
Black anodized stainless braid fuel lines and connectors
100 Cleco Temporary Fasteners and Pliers

Coyote Specific Parts:
Coyote Engine Mounts
Stainless Headers MFG. Four into One into Four Headers (Ceramic Coated Black)
Forte In-Tank High Pressure Fuel Pump
Russell Performance High Flow Fuel Filter
Moroso Low Profile Engine Oil Pan
Moroso Low Profile Oil Pickup
Aeromotive Fuel Pressure Regulator
Coyote J Pipe Headers (standard with kit)

Listed on multiple sites. Located in Clovis, NM.

[cravej]

I like how you have it optioned out, nearly matches my dream build. I would be interested if it wasn't so far from PA.

[JeepFlyer]

Bump... dropped the price. Interested? Let's chat

[JeepFlyer]

A few pictures of the build taken this weekend. Everything is straight and clean... just a little dusty
image2.jpeg
image1.jpeg
image3.jpeg
image6.jpeg
image5.jpeg
image4.jpeg

[tgjovik]

Im interested how could we get it to minnesota? Phone#

[Stanley Mcclellan]

[QUOTE=tgjovik;209813]Im interested how could we get it to minnesota? Phone#[/QUOTE
Would you send me your telephone number to [email protected]

[Stanley Mcclellan]

Please send me your telephone number to [email protected] or call me at 2564767058 or 2054773487

[Stanley Mcclellan]

Wes, please call me in Alabama at 2564767058 or 2054773487 Stan McClellan

[JeepFlyer]

More pictures as requested...

image1.JPG
image2.JPG
image3.JPG
image4.JPG
image5.JPG
image6.JPG
image7.JPG
image8.JPG

-Wes

[tgjovik]

Do you have a phone # you can be reached at? Thanks Troy

[JeepFlyer]

Do you have a phone # you can be reached at? Thanks Troy

Troy, did you get my PM?

[FFFanboy]

Wes, just curious if you still have this car? Looks like a champ. I'm over in Rio Rancho. (505) 404-1560. Thanks, Randy.

[TPLS]

is your kit still for sell? email me with your number [email protected]

[robertburghart]

Is kit still for sale? I am interested. [email protected] 602-430-5584. Please reach out, even if sold so I know.

[pattratt1]

Everyone would be interested if sold.
Thanks

[JeepFlyer]

Apologies for letting my post go unanswered for so long. I just got back from my deployment a few weeks ago and am finally getting around to this. The kit is still for sale. I will be leaving again for 4 weeks on 15 April, and I would like to complete the sale before leaving if possible.

-Wes

[chris6125]

Is kit still for sale? Interested. Contact me @ [email protected]

[Jereeves]

Second line of First post above was edited to say its SOLD