Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: power steering pump fitting

  1. #1
    Junior Member
    Join Date
    Feb 2011
    Posts
    7
    Post Thanks / Like

    power steering pump fitting

    Plumbing hydroboost and power steering, going by previous post with all fittings listed.

    wondering if anyone has ever used a banjo bolt to an-6 off of power steering pump?

    if so what fitting?
    PowerSteeringLineMap.jpg

  2. #2
    Senior Member DaleG's Avatar
    Join Date
    Mar 2013
    Location
    Prescott, AZ; formerly from the Bay Area
    Posts
    829
    Post Thanks / Like
    I just did it, but first call your PS pump supplier and see if they have the fittings you need.




    I have the Frontrunner Drive system and the pump comes with the 6AN banjo fitting outlet Vintage Air part# 852011: http://www.vintageair.com/Instructions2013/904097.pdf. I busted the internal threaded aluminum fitting (weak point) and replaced that part with Detroit Speed's part, keeping the Vintage Air part with the 6AN fitting. Combined the two; worked well...just finished today...no leaks.

    http://www.detroitspeed.com/Steering...e-fitting.html Of the Detroit Speed parts, I only used the crush washers and the threaded piece at top right (the VA part that I broke (over torqued...my fault).
    SOLD 03/2013: MK II #5004: 5.0 EFI: 8.8, 3.55, E303, TW heads, GT40 intake, 24#, 70mm MAF

    Ordered MK IV Coyote Complete Kit.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor