Miller Customs

Visit our community sponsor

Page 3 of 3 FirstFirst 123
Results 81 to 96 of 96

Thread: LCD Gauges Product Release & Promo!

  1. #81
    Good news about Windows 10 - you can disable the lock screen! That means, the display will not show a Windows background when the tablet comes out of sleep mode.

    It now goes directly to the gauges. I'm still testing over night to make sure, but it seems like it's going to act
    like an OEM LCD gauge! I'll redo the video to show the changes.

    Here's a link for anyone that wants to edit their lock screen on personal computers:
    https://windows.gadgethacks.com/how-...ws-10-0162965/
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  2. #82
    I know I haven't said much here about this, but this is such a cool project. I hope many take advantage of what you have created here. I have considered creating something like this for racing purposes, but then, low and behold, the major manufacturers came out with what I had in mind. Granted it costs $5k, but to do the work myself, or hire someone like yourself to do it, well, I would probably end up spending much more.

    I have not seen such OEM type stuff as you are making out there yet, and hopefully you will sell a lot of these.
    www.myraceshop.com

    GTM solution kits
    Corvette and Race parts

  3. #83
    Thanks Mike, I value your opinions and comments as one of the long standing members on this forum. Aside from your experience with the GTM, you have a vast automotive engineering / racing background.


    This project continues to grow and evolve on a daily basis (literally) and I'm constantly investing resources to make it better.


    Coincidentally, I priced out a set of Autometer gauges earlier this week for a customer. Just the basic four (Speed, Tach, temp, and fuel level) totalled ~ $600 CDN + taxes.


    Hopefully I can turn a few heads with this system and enhance the Supercar status of the GTM/818 (and others) with a more modern solution to analog/mechanical gauges.
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  4. #84
    Couple questions...
    Do you have the option of running 2 displays - ie gauge cluster plus console display?
    What are the user input options, ie for navigating menus? I'm assuming touch screen, but that seems awkward in the gauge cluster. Is there a 'joystick' option like in an Audi or other OEM infotainment systems?
    MK3.1 2004 Mach 1 donor.
    GTM #304

  5. #85
    Quote Originally Posted by beeman View Post
    Do you have the option of running 2 displays - ie gauge cluster plus console display?
    Yes, the "200" model that I have on the backburner uses two processors and two touchscreens. One for the dash and one for the control screen (also can display additional info).


    What are the user input options, ie for navigating menus? I'm assuming touch screen, but that seems awkward in the gauge cluster. Is there a 'joystick' option like in an Audi or other OEM infotainment systems?
    At the moment the Basic 100 version uses the touch screen.

    The advanced 100 version uses touchscreen, wireless keyboard, and a small toggle stick. It moves in all directions and has a "hat" click function to enter the selection. It's not as pretty at the Audi/BMW controllers, but it
    gets the job done.

    I've also toyed with the idea of using a smaller 2 x 4 " touchscreen as a controller. I have a video of that on YouTube; I'll link it when I get home, but here are some photos in the mean time. I think it would look cool integrated
    just above the shifter.

    Another idea that is a bit further down the road is using an in dash infotainment system to control the LCDi. I've installed one in my car that is Android based with a 7 inch touchscreen. I'm learning to write code and figure out
    methods to interface both units (most likely USB).

    1601-00.jpgjoystick3.jpg

    This is very similar to the unit in my car right now:
    lbzngg1384477632073.jpg
    Attached Images Attached Images
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  6. #86
    The first modules are shipping and it's a humbling feeling. When I purchased the GTM, the thought of creating my own module and LCD gauge system never crossed my mind, let alone developing a product
    to distribute.

    This is the second revision of hardware that integrates an interface board and it's own 5 Volt DC power supply.
    It's more compact, lightweight, and higher efficiency (less power consumption) than my original proto-type.
    100module.jpg

    As the stages of development pass, the areas for improvements continue to grow. I've found a few setbacks
    with my process that include an ink-jet printer that is just shy of acceptable resolution for printing labels.
    It also does not print on 11" x 17" sized paper. I'll have to find a laser printer that can handle the task,
    or perhaps just have it professionally printed.

    Now that I've discovered the weak links in the build flow, it will make subsequent deliveries much quicker.

    I'd like to thank Brent for taking the leap of faith and being the first to try this product. I'm looking forward
    to his review and constructive comments to help me improve my practices and design.

    Within the next few days I'll be posting the Installation Manual and User Manual for the 100 model.

    The Aventador Skin and Demo software will also be ready fairly soon!

    Contact me if you would like more information or to receive a copy of the Demo software.

    Thank you!
    Tino
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  7. #87
    The Aventador skin is now functional and ready for use. Contact me if you would like a Windows based
    demo version to try on your home computer.

    These screen shots illustrate a few configurations that can be had (formatted for 10" LCD screen):

    "Lamp Test" with most indicators shown
    avent-sport.jpg

    Accelerometer overlay
    avent-all.png

    Basic display for a less busy looking gauge
    simple.jpg


    For future options, I'm working on a steering angle sensor that will log data for track analysis.
    This sliding potentiometer can be mechanically linked to the rack to indicate front wheel angle.



    Lastly, I'm very close at configuring the OBDII code. CAN bus is closer than J1850; I'm hoping to
    have both going for early April.
    can_grabd.pngUntitled.png

    These are the PID's that I'd like to have working for the first release, along with the ability to
    clear error codes:

    #define ENGINE_COOLANT_TEMP 0x05
    #define FUEL_PRESSURE 0x0A
    #define MANIFOLD_PRES 0x0B
    #define ENGINE_RPM 0x0C
    #define VEHICLE_SPEED 0x0D
    #define IGN_TIMING 0x0E
    #define INTAKE_AIR_TEMP 0x0F
    #define MAF_SENSOR 0x10
    #define THROTTLE_POSN 0X11
    #define O2_VOLTAGE 0x14
    #define ENGINE_RUN_TIME 0x1F
    #define CYCLES_SINCE_CLR 0x30
    #define DISTANCE_SINCE_CLR 0x31
    #define BARO_PRESSURE 0x33
    #define OUTSIDE_AIR_TEMP 0x46
    #define OIL_TEMP 0x5C
    #define INJECTOR_TIMING 0x5D
    #define DEMAND_TORQUE 0x61
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  8. #88
    I'm working with another member who would like to order a custom, dual screen setup
    for his car. This would fall under the LCDi-200 order number (as opposed to LCDi-100).

    Here is an example of the main display screen with the console remote touch-screen
    (which can also display data):

    Main dash display with Aventador skin

    SCREEN1_ALL.png

    Remote screen (minimal clutter)
    LCDi_screen_QUIET_MODE.png

    "Stats" option selected (example of possible info).

    LCDi_screen_STATS_MODE.jpg

    Note: the electronic engine "START" button changes to "STOP" when the engine is running
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  9. #89
    Senior Member The Stig's Avatar
    Join Date
    Feb 2011
    Location
    Charlotte, NC
    Posts
    1,970
    Dude, that is so cool! And it gives you Soooooo much more functionality than we get with standard gauges.

    Great Job!

    Mike
    The Stig

    Some say, that I only know two facts about ducks, (both being wrong); and that if I could be bothered, I could solve the "da Vinci Code" in 47 seconds...
    All I know is that I'm called "The Stig".
    GTM #0081

  10. #90
    Thanks Mike,

    If it already isn't apparent, I'm aiming to have a system that can encompass all OEM system capabilities and then some!

    The project has already exceeded my initial goals, and there is so much more to explore.

    Self-driving GTM? Hmmm?
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  11. #91
    After a few emails of customising, the evolution of the remote screen is quite impressive.
    As a promise to our mystery customer, I will not show
    the latest version of this graphic.

    I'm sure he will start a build thread soon and share his setup personally.

    remoteLCD.jpg

    Next on the agenda is finishing off the OBDII code and begin working on the next LCD skin/
    I think it will turn out just as nice as the Aventador skin!

    2014-ferrari-laferrari-instrument-cluster-photo-593454-s-1280x782.jpgc16357c0-7e77-4981-9940-303fc7d47e09-1.jpgferrari-laferrari-zfye-020_1.jpg
    Last edited by Procision-Auto; 05-06-2017 at 07:22 PM.
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  12. #92
    OBDII CAN and J1850 protocols now ready to order!

    This feature has the ability to read codes and display the associated fault.
    You can clear codes as well as scan numerous PID's for engine information.

    The OBDII will be a standard feature on all LCDi kits (excluding basic versions).
    Up to 8 PID's can be logged with J1850 protocol and up to 20 PIDs can be
    logged with the CAN bus protocol.

    Examples of PIDs (if supported by your PCM):
    - Injector Pulse Width
    - 02 Sensor ratio
    - Intake Air Temp
    - Throttle Position
    - Manifold Pressure
    - Barometric Pressure
    - Ignition Timing
    - Engine Temperature
    - Short and Long Term Fuel Trim

    For a more extensive list of OBDII PID's and general info see this link:
    https://en.wikipedia.org/wiki/OBD-II_PIDs

    Note that the Expanded option price has dropped because it results in
    Less wiring and module development on my end. The data can be hardwired to
    the DLC harness, or you may purchased a DLC to DB-9 connector for $25
    that plugs into the vehicles existing port.

    This is an example of the display screen on the LCDi200 system. The OBDII
    data will be displayed on the main screen for the LCDi100 verions.
    OBD2promo.jpg

    Pricing for the LCDi100 kit
    LCDi100_pricing.png
    Last edited by Procision-Auto; 05-06-2017 at 07:22 PM.
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  13. #93
    Senior Member
    Join Date
    Oct 2014
    Location
    Southern Pines, NC
    Posts
    235
    those future skins look amazing! can't wait to see how this products develops over time!

  14. #94
    I know my bezel could use some professional help, but if you can see past my scratch work, here's a quick
    demo of the boot-up time of the LCD system

    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

  15. #95
    Impressive, much quicker than I would have thought. Is the table in standby mode?
    MK3.1 2004 Mach 1 donor.
    GTM #304

  16. #96
    Yes, when Ignition is shut off, a relay opens and cuts power to the tablet which allows it to enter sleep mode.
    Custom LCD Gauges , Data Loggers, Performance Parts
    www.procision-auto.com \\ 647-522-9953 \\ Voice & Text
    Proud new owner of GTM Gen 1., #105 - 08/27/11
    LQ9 Powered, G96.00 6 speed transaxle

Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Racing Adventures

Visit our community sponsor