BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: IRS Track Width - 59" or 59.5" ?

  1. #1
    Senior Member karlos's Avatar
    Join Date
    Aug 2013
    Location
    Littleton, CO
    Posts
    412
    Post Thanks / Like

    IRS Track Width - 59" or 59.5" ?

    Build manual says 59", but it seems like a lot of folks go with 59.5". Is there a compelling reason to go with one over the other?

    Thanks.

  2. #2
    Junior Member
    Join Date
    Aug 2015
    Posts
    11
    Post Thanks / Like
    I went with 59" per the manual. I ended up buying 1" wheel spacers to get the rear wheels to properly fill the wheel well. If you go with 59.5" you will be closer. My wheels have the same offset and back space as the FFR Halibrands.

    On another note there was an issue with rear axles from FFR being too short. If you go to 59.5" and have axles that are too short you might run into problems.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor