Penski shock mounting

[Roger Reid]

Here are some pics of the Penski's on the front of my build. I didn't want to hijack the chassis setup thread.

So far, I still have the yellow Koni's. But I am quietly looking at different coil-over options that will work with the RamLift Pro lift kit.

Stig, I will share any of the shock info I have. The Ram Lift Pro is shown. Because I relocated the top UCA tabs 3/4" rearward I had to relocate the top shock mount to center the Ram Lift Pro so it didn't hit the center most tabs. I was able to modify and reweld the top mount with the aluminum panel in place.