3.5" hole opening.
Visit our community sponsor
3.5" hole opening.
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Made a paper template of the full size upper grille and test fit it last night. Leaves a .1" border around the perimeter for better fitment. It's out for quote, waiting to get it back. Also modified the light mounting tabs to make them a little less boring looking. Waiting for the quote on those too.
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Pricing for the full size rear grille is as follows:
1 person: $215
2 People: $180
3 People: $150
This includes the above grille with 18 pems pressed in and nylock nuts to mount it. Does not work with FFR supplied lights. Will work with 3.5" lights (or the opening can be sanded open for a slightly larger light).
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
http://i.imgur.com/p85W9N2.png like this one with lower grill to match
Any body else interested in a setup like this before I place an order? My prototype parts are going to "The Furnace" in Canada. I'm revising the price of the lights down from $300 to $275 as well. Lights are not DOT, but are E-marked (EC/ECE, European DOT equivalent).
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
I have ten sets of the grille shown in the post above this now. Need to sand and press in pems.
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Test fit of the first full size grille (didn't cut out the rest of the bumper for the pic). These are new lights. Bigger than the previous lights and, best part, these are DOT marked for legal compliance.
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Powder coat those grills and its one of the nicest rear ends I've seen!
Don currently has the only one of these out there so we'll have to see what he does with it. 07 Fireblade has a similar rear end that he powdercoated black (his is in three sections vs the 1).
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Here is the full rear grill from Zero Decibel! All I can say is Craig is very cooperative and honest!! The install is no where being complete as the finish work is far away, did not receive a no paint finish! I agree a black finish on a light car will look killer!
IMG_3152.JPG
IMG_1645.JPG
Last edited by DMC7492; 06-30-2017 at 08:02 AM.
Craig thought I would post the finished product 100_2550.JPG100_2551.JPG thanks Brian
Looks good Brian!! I like the side marker lights, I have been looking at every vehicle on the road to find a nice looking one. What are your from?
side marker lights are out of a 97-01 crv its nice having a salvage yard I walked through and took 10 or so home and did it again till I found what I needed
Sweet! I like how that looks. Thanks for posting the pics!
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Craig, I'm interested in the setup like Don has. Not sure about the lights yet, but the grilles at least.
Pat