Fuel Filter Recommendation

[Solidworks-Mike]

What's some good aftermarket fuel filter options for us to use? Looking to use something that looks a bit nicer then the stock filter.

[Scargo]

Look at Aeromotive, Canton, Robb McGee, XRP, and many more for "pretty" filters.

[redfogo]

I got a 10micron earls filter it's also e85 safe. 175GPH filter so plenty of flow for bigger power as well

https://www.holley.com/products/plum...arts/230608ERL

Here is how I placed it
http://thefactoryfiveforum.com/showt...261#post239261

[Solidworks-Mike]

I got a 10micron earls filter it's also e85 safe. 175GPH filter so plenty of flow for bigger power as well

https://www.holley.com/products/plum...arts/230608ERL

Here is how I placed it
http://thefactoryfiveforum.com/showt...261#post239261

Thanks, was hoping someone would chime in with actual parts they used along with mounting solutions.

[redfogo]

Thanks, was hoping someone would chime in with actual parts they used along with mounting solutions.

I got this mount http://www.ebay.com/itm/251612031195...%3AMEBIDX%3AIT

[Scargo]

0450905021-M14.jpgI use this. $14-$22. Takes 12mm straight threads with crush washers. I use it with a 12mm to -6AN male fitting.
It's 5-1/2" X 2-1/4". Sturdy, rugged, all steel. Used on Porsches, etc. Not gorgeous-not ugly.

[TMScrogins]

I just upgraded my fuel system and went with a Radium Engineering filter. It is Alcohol/E-85 compliant. They have several media types (stainless cloth, micro fiberglass, cellulose paper) and the cartridges are serviceable/replaceable. In the stainless media they offer a 10-micron and a 100-micron. They also sell really nice brackets for the filter housing. They are spendy though.

https://www.radiumauto.com/High-Flow...Kits-P846.aspx

Part#s
20-0220-03 Filter
20-0218 2pc. clamp

FuelFilter.jpg