FREE: NAPA outer tie rods for Fox Mustang

[Jacob McCrea]

I bought a pair of NAPA outer tie rod ends for a Fox Mustang. The later-model rack I bought used metric threads on the inner tie rods, so I then had to buy the matching outer tie rods, leaving me with an extra set of tie rods that I can't use. The part number can be seen in the photo; I requested the highest quality part that was sold by NAPA and think I paid about $80 for both. I will say, though, that you should make sure that these will fit. I used the SN95 outers and had to cut them down a bit for them to work; these are longer than SN95s and would not have fit even if the threads were metric. In any case, they are free to anyone who wants to cover shipping. Shoot me an email at jcm250b at juno dot com as I do not log on too often.

EDIT: Taken by the gentleman below, thank you sir!

Fox Mustang Outer Tie Rods.JPG