Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Frame width w/Tires?
Hey guys. Have looked at a few body buck plans, but can't seem to find the actual dimensions of the frame without the body on it. I have a donated buck that was built exactly to the dimensions of the FFR manual, but looks like the plywood sections for that plan might not be wide enough to roll over the frame once legs are attached. This buck is 69" wide and just wanted to double check before I go an buy some plywood to cut some new pieces.
-
Not a waxer
I've got three of them here right now; 2 IRS and one live axle all with 315s on FFR wheels---they all measure between 70" and 71" sidewall to sidewall.
Jeff
-
Senior Member
Originally Posted by
Jeff Kleiner
I've got three of them here right now; 2 IRS and one live axle all with 315s on FFR wheels---they all measure between 70" and 71" sidewall to sidewall.
Jeff
Thanks Jeff!! Looks like I'm going to be cutting a couple pieces today.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor