Gen 3 FFR#48 Type 65 Coupe R Build

[Mark Dougherty]

Hi Bill
we used 1/4 inch nut serts or rivnuts
with 1/4 inch by 3/4 long bolts
much easier to replace when john breaks it

[boBQuincy]

Hi John & Mark: some of the early photos with 245 tires showed that some wheel spacers were needed. Is that how you corrected the gap and are there some spacers that are recommended for our use?

thanks,
boB

[Bill Waters]

Hi Bill
we used 1/4 inch nut serts or rivnuts
with 1/4 inch by 3/4 long bolts
much easier to replace when john breaks it

Thanks, Mark;
So, the female portion of the rivnut/nutsert set into the body and the bolt through a 1/4" hole through the race nose?