Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Which Manual R&P For Mk4 and pin drive?

  1. #1
    Senior Member 2FAST4U's Avatar
    Join Date
    Feb 2011
    Posts
    1,006
    Post Thanks / Like

    Which Manual R&P For Mk4 and pin drive?

    Breeze or FFR, doesn't matter. Prefer 18:1 ratio

  2. #2
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    8,003
    Post Thanks / Like
    The FFR unit has rack extenders installed to improve bump steer geometry. Breeze offers them with extenders or without. With either rack when going to pin drive width you will probably find that you need to use the short outer tie rod ends that Breeze offers.

    Jeff

  3. #3
    Senior Member 2FAST4U's Avatar
    Join Date
    Feb 2011
    Posts
    1,006
    Post Thanks / Like
    Thanks Jeff. What if I already have an aftermarket bump steer kit?

  4. #4
    Senior Member 2FAST4U's Avatar
    Join Date
    Feb 2011
    Posts
    1,006
    Post Thanks / Like
    Ok I found the rack extenders in the kit. That part is clear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Stewart Transport

Visit our community sponsor