Boyd Welding

Visit our community sponsor

Results 1 to 3 of 3

Thread: Turn signals

  1. #1

    Turn signals

    In the 289 FIA complete kit, what is included as the provision for turn signals? I know that the wiring harness assumes there will be turn signals but how are the intended to be actuated by FFR? Switch on the steering column? Switches on the dash? What do most builders do to deal with turn signals?

    Thanks

  2. #2
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    3,242
    Quote Originally Posted by japollon View Post
    In the 289 FIA complete kit, what is included as the provision for turn signals? I know that the wiring harness assumes there will be turn signals but how are the intended to be actuated by FFR? Switch on the steering column? Switches on the dash? What do most builders do to deal with turn signals?

    Thanks
    You should have received an ON-OFF-ON toggle switch, wired per the Ron Francis wiring instructions. Stock setup puts the switch on the dash. There are several other options. If you want a turn signal stalk on the steering column, many including me use the one from Russ Thompson. I'm assuming it would fit the 289 FIA. http://www.norcal-cobras.com/store/r...k3/mk3tss.html
    Last edited by edwardb; 01-05-2017 at 06:05 PM.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. Deliv: 08/05/2015. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. Red/white club for the third time. #8674 Build Thread

  3. #3
    Thanks so much. It just so happens that Russ' location is about 15 miles from me. Who knew!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Racing Adventures

Visit our community sponsor