Visit our community sponsor
Thanks:
0
Likes:
0
-
Turn signals
In the 289 FIA complete kit, what is included as the provision for turn signals? I know that the wiring harness assumes there will be turn signals but how are the intended to be actuated by FFR? Switch on the steering column? Switches on the dash? What do most builders do to deal with turn signals?
Thanks
-
Senior Member
Originally Posted by
japollon
In the 289 FIA complete kit, what is included as the provision for turn signals? I know that the wiring harness assumes there will be turn signals but how are the intended to be actuated by FFR? Switch on the steering column? Switches on the dash? What do most builders do to deal with turn signals?
Thanks
You should have received an ON-OFF-ON toggle switch, wired per the Ron Francis wiring instructions. Stock setup puts the switch on the dash. There are several other options. If you want a turn signal stalk on the steering column, many including me use the one from Russ Thompson. I'm assuming it would fit the 289 FIA. http://www.norcal-cobras.com/store/r...k3/mk3tss.html
Last edited by edwardb; 01-05-2017 at 06:05 PM.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Thanks so much. It just so happens that Russ' location is about 15 miles from me. Who knew!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor