Visit our community sponsor
Thanks:
0
Likes:
0
-
My rear struts mount modifications
Here is what I came up with to reinforce the rear struts mount bracket on the lower control arms of my GTM. I burnt-out the bushing that is unused, and installed a 3 inch long piece of 1.5 x1/4 DOM tubing, with a bracket welded to it. The hole is a little larger (40mm), so it is glued in, and pop riveted in place. I welded the struts bolt nut in place, then gusseted in between. I have a picture, but don't know how to post it. Maybe someone can tell me how. Lol
Last edited by oldchevyguy; 01-20-2017 at 08:12 PM.
-
Select the insert image icon (4th from the end) hopefully the image is on your computer, select from computer go to the location select it then upload.
hope that helps
-
Every time I upload a picture file, I get a message .... upload failed.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor