Hello. I am thinking about (aka, also planning) a hot rod build. A FFR isn't 100% yet, but very high on list as my starting point.
That said, I want to use a coyote with the 2.9L whipple. I have that setup in my 2015 mustang and it runs incredibly well, makes more power than should be legal and drives like stock. The 15+ whipple kit is a front inlet, jack shaft driven setup that fits under the hood of the 15 mustang. It drives off the stock accessory pulley so frame clearance that I've read about is not an issue. It will be backed up with the A6 from 15 and later fords also.
I want to run a hood (I know they make a supercharger specific hood) and side panels. Will it all fit under there? One other build I am considering has lost a lot of ground due to lack of room for coyote width. Oh, I'm not against doing some modifying to make it work, but really want to try to keep the hood flat and smooth and hood sides flat and smooth.
Thanks everyone!