Visit our community sponsor
Thanks:
0
Likes:
0
-
Quarter Window Scoops
While I can't make any absolute guarantees at this point, it looks like there is a very high probability that the quarter window scoops that you have all been looking for that Thomas#142 used to make will become available again soon. I just wanted to put this out there since I have seen several posts and had several email/phone requests for them in the past few months.
For those who are not familiar, they are the quarter window scoops that are installed on this car:
http://vraptorspeedworks.com/2014/vrsw-gtm-12/
I'll update this thread when I know more.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
-
Senior Member
any chance you/we could check if they will be dimensionally compatible with the quarter windows of the 818 coupe?
818SC chassis #206 EJ207 2.0L VF37 twin scroll || Cusco type RS 1.5 LSD || Wilwood pedal box (firewall attach) || Wilwood superlite front calipers
BUILD Phase 1: 6/6/2014 car delivered || 5/24/2015 first start || 6/7/2015 go karted || 4/20/2016 hard-top-topped || 10/25/2016 registered || 11/18/2016 inspected & complete
BUILD Phase 2: 3/8/2017 EJ207v8 || 5/29/2017 re-first re-start || 7/17/2017 re-assembled with race car bits
-
I'd say the chances of that are just about zero. Just judging from photos, it's a different size and shape. I would not be opposed to making them for the 818, but I don't have a coupe here to get a mould or dimensions from.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
-
would shipping you the FFR 818 glass work?
-
If the scoop base profile needs to be the exact same size and shape as the outside perimeter of the glass, yes....we could probably make that work.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
-
Just a heads up, as I am sure Shane would concur, the left and right sides, if they are anything like the GTM, are no where near the same profile and/or shape, so make sure you send BOTH sides if you do this as they will likely be a bit different.
-
Thanks, crash. Yes....I would assume that the glass on each side are mirror images of each other....and even if they are perfect mirror images, I would still need the glass from both sides since I have no way to create a mirror part without something to build off of.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
-
I need theses scoops NOW!!!!
-
Moulds are made and ready to produce parts. If you would like to place an order, please send me an email at the address at the top of this page (not a forum PM):
http://vraptorspeedworks.com/custom-gtm-parts/
The Quarter Window Scoops are listed in the "Body Mods, Louvers, Heat Management" section about 3/4 of the way down...right above the "Wing Window NACA Ducts".
http://vraptorspeedworks.com/quarter-window-scoops/
Many THANKS to ChevyChad for sending me his set of scoops to make this all happen!
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
-
Thanks, Shane this will be one of those parts that I believe will be one of the many parts that you provide that I will be adding to my list of must haves adding to my build cost. Love the parts I have already received.
Steve
-
Cant wait for them to show up i just submitted my payment.
-
20170221_174555 (2).jpg
Just got mine.Thank you Shane and thank you Chad for sending your scoops to them to make it happen.
Last edited by T4Twins; 02-21-2017 at 08:52 PM.
-
Ha, I was just talking about scoops like this for the 818c with AZPete
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor