Visit our community sponsor
Thanks:
0
Likes:
0
-
Valve stems for Halibrand wheels
Are the FFR Halibrand wheels supposed to come with valve stems? I just took my wheels and tires in to be mounted and the tire shop told me the Halibrand wheels needed a special valve stem. None of the stems they had would work and he didn't know where/what to order.
-
Mine did come with valve stems, which I did not use. I had some metal ones that fit that has a nut that tightens down with seal washers underneath. Take a good look in the boxes with the knockoff and lug covers, they were in one of those boxes.
-
Senior Member
Mine came with them. They were in one of the knock offs boxes.
MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
Build Thread
http://thefactoryfiveforum.com/showt...e-build-thread
PHIL 4:13 INSTAGRAM - @scottsrides
-
Thanks,
I checked. Not in there. They did send me 20 extra lug nuts??
-
Senior Member
I had the same issue. Valve stems were included with the previous vendor 17 inch wheels on #7750. But for the 18 inch wheels in the new kit, no valve stems. I called Factory Five and they said they were no longer included. Since then, I've heard from several that they did receive them. Others that didn't. So I guess I'm not sure, but bottom line I didn't get any.
When I took my shiny new BF Goodrich Rival S tires to get mounted and balanced, the tire store had an issue getting either standard or bolt-in stems to fit. I called Factory Five from the tire store, and fortunately Jay knew exactly what valve stem to use (standard TR413 rubber pull-through) and gave me instructions to pass to the installer. Success! He even offered to speak directly with the installed, but wasn't necessary. Unfortunately, I don't remember exactly what the instructions were (I've slept of few times since then...) but maybe knowing the right valve stem will get things moving. Otherwise, call Jay. Good luck.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Thanks, Courtney from FFR is sending me a set, next-day.
-
Senior Member
Originally Posted by
Straversi
Thanks,
I checked. Not in there. They did send me 20 extra lug nuts??
I didnt get any lug nuts, but got stems (even though FFR mounted my tires).
-
Well Used Member
I guess you are already set, but I did have a small issue with the FFR supplied valve stems. I ended up not using them and getting some from America's Tire when I had my tires mounted. Here's the thread. http://thefactoryfiveforum.com/showt...nd-valve-stems
If Brute Force doesn't work, you're not using enough of it.
Basic Stuff: MK4 Complete Kit #8439, Wilwood's, 17" Halibrands. Extra Stuff: Stainless brake and fuel lines, Breeze cooling, Battery mount, SS Roll Bar. Old Fart Stuff: Heater, Seat Heaters, Footbox Fresh Air, Stereo, Keyless ignition, Power Steering, Hyd Clutch.
Young & Dumb Stuff: 427w Dart, TKO600, 3 link Moser M9/Ford 9", 3.5:1, Eaton TruTrac Posi. Graduation Thread
-
Senior Member
I forgot to take mine to the shop when I took my wheels in. They had ones that look exactly the same as the FFR ones. I would be a little afraid of a tire shop that told you that you needed special ones.
-
Senior Member
I have the 15" Halibrands. No stems with mine, but the shop seemed to have no problem. They did call and ask if I wanted the raised white letter facing in or out. This place usually deals with the ultra low profiles on the 20+" rims, so mine were a little off the beaten track for them. They got it done quickly though and the wheels/tires were all cleaned and wrapped up when I picked them up.
FFR #8833 289 FIA 3-link
1965 289, TKO600 from Forte's Parts Connection
Body and Paint by Mike's Auto Restoration
Picked up 3/5/2016, First start 4/22/2017, MA legal 7/11/2018
Build Thread
http://thefactoryfiveforum.com/showt...FIA-build-8833
"Insanity is contagious" - Joseph Heller
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor