Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: Edelbrock Coyote Fitment?

  1. #1
    Member
    Join Date
    Aug 2013
    Posts
    42
    Post Thanks / Like

    Edelbrock Coyote Fitment?

    Just.. curious, but any reason why this wouldn't work (fitment wise) in a 33?

    http://www.edelbrock.com/automotive/...d-coyote.shtml

  2. #2
    Senior Member
    Join Date
    Feb 2011
    Location
    Bourne-Cape Cod, MA
    Posts
    813
    Post Thanks / Like
    Should be no reason it wont fit, Need a photo of the back of the engine to really tell.

    Not sure 785 horsepower would be enough.


    Be sure there is a tune for the control pack, the electronics are different than a mustang.
    FFinisher/AKA RE63

  3. #3
    Member
    Join Date
    Aug 2013
    Posts
    42
    Post Thanks / Like
    Id also need a different oil pan?

  4. #4
    Senior Member
    Join Date
    Feb 2011
    Location
    Bourne-Cape Cod, MA
    Posts
    813
    Post Thanks / Like
    not for a hot rod,

    Stock Oil pan works in the hot rod, not in a roadster or coupe
    FFinisher/AKA RE63

  5. #5
    Senior Member H R Lucky's Avatar
    Join Date
    Jun 2012
    Location
    CrossRoads, Pa.
    Posts
    272
    Post Thanks / Like
    you will need to remove alternator, cut off mounting boss & remount alternator backwards on the passenger side of the engine. (not really a big problem, just need to get a solid pulley for the alternator as the stock one is clutched & it needs to turn backwards from original).

    But all of this is the same for any Coyote engine in the Hot Rod.
    Nevin, AKA H. R. Lucky
    33 Hot Rod sn 524 build started 3/18/2013, First Start-5/09/2015, Go Cart-6/01/2015
    5.0 Coyote engine, 9in. Ford rear, 4 Link, Wilwood 12in. front brakes
    AC, power steering, FFR 17/18in. Hot Rod wheels

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor