Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Coil wiring
This is embarrassing because I did this six years ago and can't remember how I did it. This is on a carbed and standard coil 302. How do I wire the coil? There are two wires coming from the distributor to it, but what else? I know the purple wire from the RF harness goes to the coil to provide the the info for the tach, but what wire do I use to power the coil? Sorry for the simple question. I tried searching but sometimes it becomes info overload. Right now there is black/red wires from the distributor. There is a thick orange one that is in a bundle labeled "EFI/Coil crank". This wire is labeled EFI or Coil. I wasn't sure if this is the power source for the coil or if this bundle was only intended for EFI engines.
-
Senior Member
The thick orange wire labeled "EFI/Coil" does in fact supply power to your coil.
Cheers,
John
MK IV Roadster #8631
Ford 302, Holley Terminator EFI, T5z, 3.55 Rear End, IRS, 17” Halibrand Replicas (9” front, 10.5” rear), Nitto 555 G2’s (275/40ZR17 front, 315/35ZR17 rear), Fast Freddie’s Power Steering, F5 Wilwood Brakes, FFMetal’s Firewall Forward, Forte’s Hydraulic Clutch & Throttle Linkage
https://www.ffcars.com/threads/phile.../#post-4776313
-
Senior Member
Originally Posted by
phileas_fogg
The thick orange wire labeled "EFI/Coil" does in fact supply power to your coil.
Cheers,
John
Thank you.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor