Can someone please send me the correct part number to use for the GTM wiper arm? The arm that I have is too long and I'm not 100% sure that I have the other arm at home.
Thank you,
Mike
Visit our community sponsor
Can someone please send me the correct part number to use for the GTM wiper arm? The arm that I have is too long and I'm not 100% sure that I have the other arm at home.
Thank you,
Mike
The Stig
Some say, that I only know two facts about ducks, (both being wrong); and that if I could be bothered, I could solve the "da Vinci Code" in 47 seconds...
All I know is that I'm called "The Stig".
GTM #0081
http://thefactoryfiveforum.com/showt...ers#post277783
Look for 2552
I hope this helps
Just an old man with a great hobby
Thank you Roger!
I had been waiting until the very end to install the wiper arm & blade. And now I find that it is too long for the upper edge of the windshield.
I have both wiper arms: (driver's & passenger's). I think the passenger's side is the shorter of the two, and apparently it is too long and extends the blade about 3 to 4 inches past the windshield seal. Can you guys tell me whether you had to use a different wiper arm, and/or a specific length wiper blade in order to get a better fit?
If you guys can offer any insight / help / or tips, I would appreciate it very much.
Thank you,
Mike
Last edited by The Stig; 05-31-2017 at 08:34 PM.
The Stig
Some say, that I only know two facts about ducks, (both being wrong); and that if I could be bothered, I could solve the "da Vinci Code" in 47 seconds...
All I know is that I'm called "The Stig".
GTM #0081
Hi Mike,
The wiper arm came with the kit from FFR....it is not a donor part. The one I have here has 25552 written in marker on the package. The bar code label has the following info:
OE# 55155649
S&T# F139
And in the lower corner of the label is 1390207078
The wiper blade is a standard 22" wiper blade.
Not sure if any of that will help?
Last edited by VRaptor SpeedWorks, LLC; 06-01-2017 at 08:13 AM.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
Thank you Shane and Roger. That cleared it up!
I ordered the FF arm and it should be here Monday.
I appreciate the help.
Mike
The Stig
Some say, that I only know two facts about ducks, (both being wrong); and that if I could be bothered, I could solve the "da Vinci Code" in 47 seconds...
All I know is that I'm called "The Stig".
GTM #0081