BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 40 of 60

Thread: The Go-Dad-Go Chevy Cobra Came To Life Today!

  1. #1

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1

    The Go-Dad-Go Chevy Cobra Came To Life Today!

    Hey Gang,

    The Go-Dad-Go Chevy Cobra Came To Life Today!
    I had some medical delays, the worst was severing my left pinkie and boogering up my ring and middle fingers as well, so that is why we've had a delay getting to our 1st start.
    The good news is that I'm on the mend plus I can still count to 10 when I'm fully clothed, 20 with my shoes off and 21 when I'm in the shower. (Yea!)
    Anyway, we are really thrilled to post these three videos showing that you really can stuff a Small Block Chevy with a 6-speed transmission in a Factory Five MK-4 Roadster.
    So far we've put about 3-4 miles on our High Powered Go-Kart and the police have yet to arrive at Camp Go-Dad-Go!
    The mufflers in the video are just to knock the sound down until we get to the next phase of the project.

    https://youtu.be/p-pvogd2Bj8
    https://youtu.be/I86I7a_x9W0
    https://youtu.be/BcsVu80VG5k

    Steve

    PS: You can see my Dr. Evil Pinkie sticking up in the last video if you look really close.
    Last edited by GoDadGo; 06-17-2017 at 03:33 PM.

  2. #2
    Well Used Member boat737's Avatar
    Join Date
    Feb 2016
    Location
    So. Bay (So. Calif.)
    Posts
    874
    Post Thanks / Like
    Very cool. Congratulations.
    If Brute Force doesn't work, you're not using enough of it.
    Basic Stuff: MK4 Complete Kit #8439, Wilwood's, 17" Halibrands. Extra Stuff: Stainless brake and fuel lines, Breeze cooling, Battery mount, SS Roll Bar. Old Fart Stuff: Heater, Seat Heaters, Footbox Fresh Air, Stereo, Keyless ignition, Power Steering, Hyd Clutch.
    Young & Dumb Stuff: 427w Dart, TKO600, 3 link Moser M9/Ford 9", 3.5:1, Eaton TruTrac Posi. Graduation Thread

  3. #3

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by boat737 View Post
    Very cool. Congratulations.
    Thanks Boat737

  4. #4
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    8,078
    Post Thanks / Like
    YES!!!

    Good job Steve! Oh, and that count to 21 in the shower deal wins "Forum line of the week"

    Jeff

  5. #5
    Senior Member wareaglescott's Avatar
    Join Date
    Apr 2016
    Location
    Auburn, AL
    Posts
    2,146
    Post Thanks / Like
    Really enjoyed the videos Steve. Congratulations on a huge milestone! I am really liking following your unique approach to this build.
    I must ask. Will there be a bowtie badge on the exterior of your Cobra?
    MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
    Build Thread http://thefactoryfiveforum.com/showt...e-build-thread
    PHIL 4:13 INSTAGRAM - @scottsrides

  6. #6

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Jeff Kleiner View Post
    YES!!!

    Good job Steve! Oh, and that count to 21 in the shower deal wins "Forum line of the week"

    Jeff
    This Is A Huge Compliment From My Perspective!

    Thanks-O-Million!

  7. #7

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by wareaglescott View Post
    Really enjoyed the videos Steve. Congratulations on a huge milestone! I am really liking following your unique approach to this build.
    I must ask. Will there be a bowtie badge on the exterior of your Cobra?
    There will be no Bowtie Badges on the exterior; however, I am thinking about putting 383 emblems above the louvers, but no other badging.

    Man, was it fun to tool around the house since the car has been ready to roll since March.

  8. #8

    Moderator
    RoadRacer's Avatar
    Join Date
    Oct 2011
    Location
    Manor, TX
    Posts
    2,245
    Post Thanks / Like
    383 FTW! Congratulations!! I can't wait to watch the videos when I get home!
    James

    FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
    My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
    Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100

  9. #9

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by RoadRacer View Post
    383 FTW! Congratulations!! I can't wait to watch the videos when I get home!
    Thanks Road Racer!

    Hope it measures up.

  10. #10
    Member
    Join Date
    May 2017
    Posts
    60
    Post Thanks / Like
    Congrats! Love it!

  11. #11
    Senior Member wareaglescott's Avatar
    Join Date
    Apr 2016
    Location
    Auburn, AL
    Posts
    2,146
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    There will be no Bowtie Badges on the exterior; however, I am thinking about putting 383 emblems above the louvers, but no other badging.

    Man, was it fun to tool around the house since the car has been ready to roll since March.
    That sounds like a good idea with the badges above the louvers. Check out billet badges.com. They could make you some pretty awesome custom pieces if you are interested.
    MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
    Build Thread http://thefactoryfiveforum.com/showt...e-build-thread
    PHIL 4:13 INSTAGRAM - @scottsrides

  12. #12

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by wareaglescott View Post
    That sounds like a good idea with the badges above the louvers. Check out billet badges.com. They could make you some pretty awesome custom pieces if you are interested.
    EdwardB suggested the same vendor so it sounds like you guys have a solution for me.
    I'll contact them to see about doing something that looks period correct that also works without overstating the drive line.
    Thanks Again!

  13. #13

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Eespensen View Post
    Congrats! Love it!
    I Appreciate The Kind Words, Especially Since I'm Definitely In The Minority!

  14. #14
    Member
    Join Date
    May 2017
    Posts
    60
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    I Appreciate The Kind Words, Especially Since I'm Definitely In The Minority!
    Hey, we are all minorities now a days! These cars are unique and each one is special. No two are the same. Owners seem to celebrate their differences under the FF5 umbrella and I can't wait to start building...my kit will be picked up July 1 by Stewart Transport! Congrats on something rare, special and fantastic!

  15. #15
    Senior Member
    Join Date
    Oct 2016
    Location
    Fayetteville WV
    Posts
    256
    Post Thanks / Like
    Awesome Steve! Great job and keep it going.
    Len
    1972 Corvette Stingray 350 c.i. Manual Steering & Brakes
    2003 H-D Softail Deuce 88 c.i. TwinCam
    Gen 3 Coupe Dreamer

  16. #16
    Senior Member Cobradavid's Avatar
    Join Date
    Feb 2011
    Location
    League City, Texas
    Posts
    517
    Post Thanks / Like
    Congrats on the big milestone! The engine sounds great.

    David
    My Saving Grace: John 3:16

    FFR6687, Graduate #39 in the Class of 2009
    The Factory Five Forum March 2012 POM

  17. #17
    Senior Member
    Join Date
    Oct 2016
    Posts
    407
    Post Thanks / Like
    Congrats steve. I plan on bringing my mk4 home tommorow for Father's Day and taking the wife and kids for rides... hell the whole neighborhood can ride. That means I can drive it longer!

  18. #18
    Senior Member srobinsonx2's Avatar
    Join Date
    Jul 2016
    Location
    San Antonio, TX
    Posts
    325
    Post Thanks / Like
    Very nice. i really like the engine badges. I am thinking about some myself.
    FFR MK4 Complete Kit #8952
    Build Thread
    Bodywork Thread
    3 Link Rear Suspension, Gordon Levy 347 SBF with T5
    First start Feb 20, 2017, First Go Kart March 5, 2017, Registered & Title April 25, 2017

  19. #19
    Straversi's Avatar
    Join Date
    Nov 2014
    Location
    Palos Verdes, CA
    Posts
    1,278
    Post Thanks / Like
    Congrats!
    -Steve
    Mk IV #8901 - Complete kit, Coyote, TKO-600, IRS. Ordered 5/23/16, Delivered 7/14/16, First Start 8/13/17, First Go-Kart 10/22/17, Registered and Completed 10/18/18. Build Thread: http://thefactoryfiveforum.com/showt...V-Coyote-Build Graduation Thread: https://thefactoryfiveforum.com/show...-Roadster-8901

  20. #20
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Mexico, MO
    Posts
    5,609
    Post Thanks / Like
    Very cool!
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  21. #21
    Senior Member Barrel's Avatar
    Join Date
    Aug 2011
    Location
    Mornington, Victoria, Australia
    Posts
    162
    Post Thanks / Like
    Yeh. All right .Great moment CHEVY Cobra. It will stay with you forever. Congratulations on a "must read" thread.(mumble, mumble).
    Last edited by Barrel; 06-18-2017 at 03:37 AM.

  22. #22
    Senior Member KDubU's Avatar
    Join Date
    May 2015
    Location
    Kennebunkport, ME
    Posts
    1,192
    Post Thanks / Like
    Sounds good Steve! Congrats on getting her out there. My wife had her pinkie severed as well, in her case by one of our dogs but had a hand surgeon sewn it back on. All happened down in Virginia Beach when I was working with the Navy. She calls it her Franken finger.

    Again congrats!
    Kyle

    Complete Kit pickup 09/05/2015, 351w, QF680, 3.55, 3-Link, 15" Halibrands with MT's, Painted Viking blue with Wimbledon white stripes on 03/15/2017. Sold in 08/2018 and totally regret it.

  23. #23
    Boydster's Avatar
    Join Date
    Aug 2014
    Location
    Maryville, TN
    Posts
    1,104
    Post Thanks / Like
    Awesome! Great videos. Another vote for billet badges... they do beautiful work and will work with you on what you want. They did my 427 badges.
    ---Boyd---
    MkIV #9042 build thread
    www.boss427.us
    427W, TKO600, Moser 3.55 rear.
    Delivered Feb 2017, Graduated Nov 4, 2019

  24. #24

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Hey Gang,

    Thanks for the feedback and for checking out our videos so in the Spirit of Father's Day I wanted to share the rest of the story and why we ordered our MK-4 Roadster.

    My better half and I went on a cruise, the first week of November 2014, to celebrate my wife's Half-O-Hundred (50th) birthday. I had been drooling over building a Factory Five for years, but didn't think I could swing the expense.

    Before we left the house to start our little trip I was looking at the Factory Five Fall Sale and commented to my better half, "Who Extends A Sale To End On November 10th?" That day was my Father's Birthday, it was also the day that I had asked my wife out for our 1st date, she was only 16, and it also happened to be the day that we were returning from our cruise.

    We boarded the ship, got things settled in our cabin and went up to the fly bridge to see our vessel shove off. When we got up to our favorite departure spot we looked over to see the Port of New Orleans Fireboat in the middle of the river giving us a very proper send off. What a special day that was because my father designed that fireboat, which was one of his favorites.

    When we saw the General Roy Kelley my wife looked at me with tears in her eyes and said, "You've Got To Order Your Car!"

    My Dad passed away in early 2002, but the General Roy Kelley is still in service today which can be viewed in the attached video:

    https://youtu.be/YFQwY3OWCBo

    Have A Great Father's Day All You Dads, Pops, Papas, Gramps, Grumps & Grand Fathers!

    Now You All Know The Rest Of The Story!

    Steve
    Last edited by GoDadGo; 06-18-2017 at 12:12 PM.

  25. #25
    Senior Member Cobradavid's Avatar
    Join Date
    Feb 2011
    Location
    League City, Texas
    Posts
    517
    Post Thanks / Like
    Steve, Nice story and cool video on the fire boat. Thanks for sharing. Happy Father's Day!

    David
    My Saving Grace: John 3:16

    FFR6687, Graduate #39 in the Class of 2009
    The Factory Five Forum March 2012 POM

  26. #26
    Carl carlewms's Avatar
    Join Date
    May 2012
    Location
    Nokesville, VA
    Posts
    1,125
    Post Thanks / Like
    Congratulations ... looks great and sounds fantastic!
    Mk 4 Roadster
    October 25, 2012 - Kit Arrives
    April 8, 2013 - Build Starts
    August 23, 2015 - Rolling Chassis/Engine & Transmission Installed
    March 26, 2016 - Go Cart

  27. #27

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Cobradavid View Post
    Steve, Nice story and cool video on the fire boat. Thanks for sharing. Happy Father's Day!

    David
    Thanks, Cobra David!

    Have A Great Father's Day As Well!
    Last edited by GoDadGo; 06-18-2017 at 12:07 PM.

  28. #28
    Senior Member
    Join Date
    Oct 2016
    Location
    Fayetteville WV
    Posts
    256
    Post Thanks / Like
    Great video but even better story! Happy Father's Day to all Dads out there.

    Thanks, Steve!

    Len
    1972 Corvette Stingray 350 c.i. Manual Steering & Brakes
    2003 H-D Softail Deuce 88 c.i. TwinCam
    Gen 3 Coupe Dreamer

  29. #29
    mcwho's Avatar
    Join Date
    Feb 2011
    Location
    DeBary - Florida
    Posts
    541
    Post Thanks / Like
    Steve,

    The Videos were great, and it sounds good too. I like the idea of the 383 badges...

    Great job, and awesome milestone to drive around the neighborhood.

    I'll bring Marshmellows next time you start her up.

    Last edited by mcwho; 06-19-2017 at 10:56 AM.
    Baghdad Bob

    Complete Kit Delivered July 2010, serial @ 7287, Whitby Power Brakes, Whitby Tonneau, Power Steering w HEIDTS PS Valve, Hydralic clutch, 15" Wheels, BFG Tires, 331 stroker w Quick Fuel 650, RPM Heads, Air Gap Intake. IRS w 3.27, TKO-600. FFMETAL Firewall Forward, FFMETAL Dropped Battery Box in Trunk, Enlarged Passenger footbox, Breeze Cubby storage, Breeze Seat Brackets, Herbs Door Panels. Ford ruby red 12 coats.

  30. #30

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by mcwho View Post
    Steve,

    The Videos were great, and it sounds good too. I like the idea of there 383 badges...

    Great job, and awesome milestone to drive around the neighborhood.

    I'll bring Marshmallows next time you star her up.
    Bagdad Bob,

    We've put about 10 miles on it so far and the power is way over the top for such a light weight vehicle.
    The combination was originally intended to go in my 1980 Z/28 (Lost In Hurricane Katrina 2005) so the power is a bit intimidating in such a light car.
    I'm just glad they've found their way to a really spectacular new home after nearly a dozen years.

    Steve

    PS: I'll make sure that we have plenty of Graham Crackers and Hershey Bars on hand to properly complement those Marshmallows.

  31. #31
    Senior Member R Thomas's Avatar
    Join Date
    Jan 2015
    Location
    Myrtle Beach, SC
    Posts
    153
    Post Thanks / Like
    Blog Entries
    22
    Congrats, who woulda thought a Chevy would ever fire up in a Replica Cobra Roadster, lol. Seriously awesome.
    Daily Driver 2011 Ford Mustang Convertible
    Donor 1997 Mustang Coupe
    Someday a Type65 Street Coupe

  32. #32
    Senior Member
    Join Date
    Aug 2016
    Location
    Northern VA
    Posts
    653
    Post Thanks / Like
    Congrats! Going to sound great.

  33. #33
    Senior Member smithbks's Avatar
    Join Date
    Mar 2014
    Location
    Atlee, VA
    Posts
    152
    Post Thanks / Like
    Way to go Steve! your car is awesome
    Mk4 #8340, 351w/427, 3-link, Wilwood 4 piston rear brakes, 3.27 gear, TKO600, delivered June 18th, 2014

  34. #34
    Senior Member lahrs37's Avatar
    Join Date
    Jul 2014
    Location
    Philadelphia
    Posts
    377
    Post Thanks / Like
    Awesome!!! Congrats!!!!
    5.0 HO from a '93 Mustang, SVE heads, Trickflow stage 1 cam, Trickflow Street Burner intake manifold, T-5 w/mid shift, IRS
    Delivery 9-10-16, First Start 12-28-16, First Go-Kart 2-18-17
    Build thread: http://thefactoryfiveforum.com/showt...MK4-8951-Build

  35. #35
    Senior Member phileas_fogg's Avatar
    Join Date
    Jun 2015
    Location
    Fairfax Station VA
    Posts
    1,235
    Post Thanks / Like
    Congratulations Steve. It's a great feeling.


    John
    MK IV Roadster #8631
    Ford 302, Holley Terminator EFI, T5z, 3.55 Rear End, IRS, 17” Halibrand Replicas (9” front, 10.5” rear), Nitto 555 G2’s (275/40ZR17 front, 315/35ZR17 rear), Fast Freddie’s Power Steering, F5 Wilwood Brakes, FFMetal’s Firewall Forward, Forte’s Hydraulic Clutch & Throttle Linkage
    https://www.ffcars.com/threads/phile.../#post-4776313

  36. #36
    On a roll Al_C's Avatar
    Join Date
    Aug 2014
    Location
    Wheaton, IL
    Posts
    1,414
    Post Thanks / Like
    Good for you! Great way to celebrate Father's Day!
    Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
    Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount

  37. #37
    Senior Member
    Join Date
    Jul 2016
    Location
    Vermilion,OH
    Posts
    230
    Post Thanks / Like
    That is an awesome Fathers day gift, congratulations! It looks and sounds great, that first short drive is a great experience.

  38. #38
    Senior Member Yama-Bro's Avatar
    Join Date
    Jul 2012
    Location
    Kearney Nebraska
    Posts
    847
    Post Thanks / Like
    Congrats! An glad to hear you can still count to 21 =)
    Started dreaming of a Cobra around 1987
    Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022
    Click here for my build thread
    Serial #9158
    Design Engineer at BluePrint Engines

  39. #39
    Senior Member
    Join Date
    Feb 2011
    Location
    Myrtle Beach, SC
    Posts
    2,108
    Post Thanks / Like
    Congratulations Steve!

    What an awesome milestone for you, and it must feel awesome. I know you must be proud, as well you should!

    One issue however... you can't just drop a line that you mangled your hand, and not tell us the story of how it happened. Spill some details brother... I'm glad you are OK!

    Regards,

    Steve

  40. #40

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,572
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by WIS89 View Post
    Congratulations Steve!

    What an awesome milestone for you, and it must feel awesome. I know you must be proud, as well you should!

    One issue however... you can't just drop a line that you mangled your hand, and not tell us the story of how it happened. Spill some details brother... I'm glad you are OK!

    Regards,

    Steve
    I was working on my brother's Mecham Trans Am (#9 of 20 produced that year #1 of #1 bored sleeved and stroked to 427 CID) changing a window regulator. The regulator was locked in the vice when it slipped and snapped nabbing my pinkie, ring and middle fingers.

    While my abilities are limited at this point in time, and being left handed is not a plus right now, I'm thankful that I am progressing. It make me think of our Service Men and Women and Law Enforcement Folks who have given so much to keep us safe and free.

    With That Said, I Only Have A Pinkie Problem!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor