Without a body it's really difficult to know how the body work is cut out around the rear wheels and chassis members. Very few pics show this area with the body on and wheel off.

I'm particularly interested in the relationship between the body and the chassis members, so I don't put brake/fuel lines etc in a bad place.

I've found two pics so far; the ridetech 33 and one from street rodder. One shows a straight edge for the bottom of the rear inner fender, while ridetech look to have cut away a lot of that area, and left a curved inner fender - theirs follows the wheel diameter more.

Has anyone else seen pics from the front or side of the rear (one without the wheel ideally). It's a rare angle to show with body and without wheel - but I have no idea where the chassis uprights are wrt the body. Thanks!

0901sr_15_z-factory_five_racing_1933_ford-trunk_view.jpg hrdp-1307-17-no-bull-ride-tech-1933-factory-five-hot-rod-rear-triple-adjustable-coilover-shocks.jpg