After watching the body removal video by Dan at factory five, I just have one question.
It scares the poo out of me to see the rear end of the car bend and twist up when he lifts it off the frame. I always thought that you had to put a 2 x 4 board in between the dash and the rear to keep it from flexing like that.

I already cut a 2 x 4 board and put it in to support it, but now I'm worried that I won't be able to lift the back end off with it in place, not allowing it to flex.

Can anybody advise me if the board is okay to stay or is it going to stop me from pulling the body off the frame. Thanks!

Fyi, i also posted this in the tech area but noticed this gets more views so I added here too!