MKI steering rag joint question

[jsncrlsn]

Hi All,

New to the forum. Been working on the MKI I inherited back in April for a bit now. Ran across an upgrade my Uncle must have done to what appears to be a Flaming River manual steering rack and two universal joints (also Flaming River?) but no shaft to connect the two.

Here are pics of the two pieces.

IMG_2086.JPGIMG_2087.JPG

I looked through all the part I have (twice) and can't find the shaft to connect these two. Any ideas on where I can get this piece?

[bil1024]

Talk to Mark at Breeze, he may have one

[michael everson]

Its called Double D shaft. FFR carries it. Might also be able to get it from Summit,
Mike

[CraigS]

Here ya go;
https://www.summitracing.com/search?...ord=DD%20shaft
Measure the OD at the rounded part not across the flats. good chance it is 3/4 inch. ON my MkII the upper shaft is 1.0 and that lower is 3/4.

[initiator]

And welcome to the forum! What a neat project to be passed down to the next generation. You've found the best source of help and support on the web.

Had to look up Ridgefield, despite being a Washington native. Looks like you're not far from the Portland area, which has a strong FF Cobra presence.