Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 8 of 8

Thread: Tri-Y XForce headers from Summit Racing

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Blwalker105's Avatar
    Join Date
    Feb 2015
    Posts
    274
    Post Thanks / Like

    Tri-Y XForce headers from Summit Racing

    Anyone have feedback on these TH-EJ20-TY, $179 headers from Summit Racing, including the up-pipe?

    Tri-y, polished stainless, equal-length...what gives??

  2. #2
    fasterer and furiouser longislandwrx's Avatar
    Join Date
    Aug 2012
    Location
    Long Island
    Posts
    2,540
    Post Thanks / Like
    Blog Entries
    6
    looks like a basic ebay header, so you will likely have fitment issues as well as welding quality issues and inferior steel quality.

    on their website they appear to photoshop their logo onto an generic header so that should speak volumes.

    I would rather get a used set of name brand headers for a little more. I bought a set of perrins for $300
    A well stocked beverage fridge is the key to any successful project.

  3. #3
    Senior Member Blwalker105's Avatar
    Join Date
    Feb 2015
    Posts
    274
    Post Thanks / Like
    Yeah, if it looks too good to be true, it probably is, huh?

  4. #4
    Administrator
    Wayne Presley's Avatar
    Join Date
    Feb 2011
    Location
    Enterprise Alabama
    Posts
    2,804
    Post Thanks / Like
    Blog Entries
    3
    Perrin are the only equal length header that does not hang too low
    Wayne Presley www.verycoolparts.com
    Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos

  5. #5
    Senior Member Bob_n_Cincy's Avatar
    Join Date
    Sep 2012
    Location
    Cincinnati OH
    Posts
    3,903
    Post Thanks / Like
    Quote Originally Posted by Wayne Presley View Post
    Perrin are the only equal length header that does not hang too low
    Wayne,
    How close to the frame are the Perrin equal length headers? The picture below looks like the are pretty far in front of the engine.
    Bob
    psp-ext-055_install_straightonx600.jpg
    818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
    My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
    My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread

  6. #6
    Senior Member Blwalker105's Avatar
    Join Date
    Feb 2015
    Posts
    274
    Post Thanks / Like
    Thanks Wayne...good to know.

  7. #7
    Senior Member Mulry's Avatar
    Join Date
    May 2012
    Location
    Dallas
    Posts
    273
    Post Thanks / Like
    FWIW, this is the equal length eBay header that I purchased for our EJ205. Is a very good fit on the engine and the weld and material quality are good. It does not hang below the rails of the chassis during test fitting.

    http://www.ebay.com/itm/Turbo-Equal-...907062?vxp=mtr

  8. #8
    Senior Member RM1SepEx's Avatar
    Join Date
    Jul 2011
    Location
    Freeport, ME
    Posts
    3,801
    Post Thanks / Like
    Those XForce shown on their website and summit don't look like anything I can find on EBay... No mention of alloy or thickness tho
    Dan

    818S #17 Picked up 8/1/13 First start 11/1/13 Go Kart 3/28/14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

FFMetal

Visit our community sponsor