Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Infinity Box Electrical Wiring System

  1. #1
    Member
    Join Date
    Feb 2015
    Location
    Onalaska, TX
    Posts
    90
    Post Thanks / Like
    Blog Entries
    1

    Infinity Box Electrical Wiring System

    This is for any one that has installed the Infinity Box electrical wiring system into a 33 Hot Rod with Vintage Gen II A/C system.
    Where does the purple wire get hooked up to coming off the power relay, it shows being hooked up to the ignition switch, is this correct when using the Infinity Box?
    Any help would be appreciated.

    Bob Hunt

  2. #2
    2bking's Avatar
    Join Date
    Jul 2013
    Location
    Garland, Texas
    Posts
    799
    Post Thanks / Like
    I have the Infinity Wiring in a Roadster with a Vintage AC but I don't know what purple wire or power relay your speaking about. More details would be helpful. The Infinity Wiring eliminates the need for most relays.
    King
    Roadster #8127, ordered 7/12/13, received 9/11/13
    http://thefactoryfiveforum.com/showt...4-Coyote-Build

  3. #3
    Infinity Box
    jharris's Avatar
    Join Date
    May 2013
    Posts
    42
    Post Thanks / Like

    Vintage Air Purple Wire

    Quote Originally Posted by Dodgeman View Post
    This is for any one that has installed the Infinity Box electrical wiring system into a 33 Hot Rod with Vintage Gen II A/C system.
    Where does the purple wire get hooked up to coming off the power relay, it shows being hooked up to the ignition switch, is this correct when using the Infinity Box?
    Any help would be appreciated.

    Bob Hunt
    Bob, the purple wire in the Vintage Air harness needs to be connected to the ignition output on your front POWERCELL. When the ignition is on, the purple wire has to get 12-volts. This closes a relay inside the Vintage Air controller and powers it up. You're only triggering a relay coil so the current draw is minimal.

    The purple wire does the same thing on both the Gen-II and Gen-IV.

    This blog post on our website gets you more details on wiring the Vintage Air system into Infinitybox.

    http://infinitybox.com/wiring/vintage-air-wiring/

    Please let us know if you have additional questions.
    Jay Harris
    Infinitybox, LLC
    http://infinitybox.com/
    Manufacturers of the INFINITYBOX Intelligent Wiring System

  4. #4
    Member
    Join Date
    Feb 2015
    Location
    Onalaska, TX
    Posts
    90
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by jharris View Post
    Bob, the purple wire in the Vintage Air harness needs to be connected to the ignition output on your front POWERCELL. When the ignition is on, the purple wire has to get 12-volts. This closes a relay inside the Vintage Air controller and powers it up. You're only triggering a relay coil so the current draw is minimal.

    The purple wire does the same thing on both the Gen-II and Gen-IV.

    This blog post on our website gets you more details on wiring the Vintage Air system into Infinitybox.

    http://infinitybox.com/wiring/vintage-air-wiring/

    Please let us know if you have additional questions.
    Jay,

    Thanks for the information, this one really stumped me, I guess I should call you guys first when I am having problems since its your system.
    Thanks again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor