Visit our community sponsor
Thanks:
0
Likes:
0
-
Where to Get 2006 WRX Control Arm Mounting Bolts
Hello All,
On or around page 103 of the 818 assembly manual it shows the bolts and nuts for mounting the rear of the control arm to the chassis. Unfortunately, I do not have the bolts or nuts. Anyone know where I can get them. Or even more importantly anyone know the size and grade of those bolts, grade 8, 10, etc?
Thanks
Glenn
-
I was able to get the bolts at Tractor Supply. I used grade 8. It was too long ago to remember the size. I wanna say they were 12 or 14mm.
-
Senior Member
Here is what I used to mount the bushings
Donor Nut, self locking M14x1.5 4 EA
Donor Bolt, Hex M14X1.5X50 -10.9 4 EA
McMaster Washer, M14 - Hardened Flat 8 EA
Bob
Last edited by Bob_n_Cincy; 11-17-2017 at 12:37 AM.
-
Thanks for the help. It is greatly appreciated.
Glenn
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor