Unfinished 289 complete kit

[Bguetter]

I need to free up some cash for business expansion so i'm putting my 289 kit up for sale.

It's a 289 FIA complete kit and in the roller chassis stage with no motor or transmission installed. Barely started wiring, harness is just roughly layed out.

289 Complete kit
3-link
powdercoated chassis
oil cooler kit
vintage low back race seats
wind wings
assembled side louvers
battery cutoff switch
external battery post
extra competition mirror
FIA Trunk
FFR 15" halibrand replica wheels with Hoosier tires mounted/balanced
FFR Rear brake kit
Breeze front battery mount

Completely rebuilt 8.8 rear end. 31 spline axles, new 31 spline diff, new 3.55 gears, new bearings, seals, etc. aluminum diff cover

I bought a rebuilt 306 short block new from Creb Engineering with a TFS stage 1 cam installed ($1700) and was going to build up the motor myself. I can include this in the sale as well.

This is my second FFR build.

Not a great build thread, but a few more pictures can be found here---> http://thefactoryfiveforum.com/showt...X-2323-Tribute

Rough estimate i have $24,000 into it. I’m asking $20,000. Open to reasonable offers. I'm located in Louisville, KY.

[jwd]

I need to free up some cash for business expansion so i'm putting my 289 kit up for sale.

It's a 289 FIA complete kit and in the roller chassis stage with no motor or transmission installed. Barely started wiring, harness is just roughly layed out.

289 Complete kit
3-link
powdercoated chassis
oil cooler kit
vintage low back race seats
wind wings
assembled side louvers
battery cutoff switch
external battery post
extra competition mirror
FIA Trunk
FFR 15" halibrand replica wheels with Hoosier tires mounted/balanced
FFR Rear brake kit
Breeze front battery mount

Completely rebuilt 8.8 rear end. 31 spline axles, new 31 spline diff, new 3.55 gears, new bearings, seals, etc. aluminum diff cover

I bought a rebuilt 306 short block new from Creb Engineering with a TFS stage 1 cam installed ($1700) and was going to build up the motor myself. I can include this in the sale as well.

This is my second FFR build.

Not a great build thread, but a few more pictures can be found here---> http://thefactoryfiveforum.com/showt...X-2323-Tribute

Rough estimate i have $24,000 into it. I’m asking $20,000. Open to reasonable offers. I'm located in Louisville, KY.

Is the car still for sale? I’m very interested and ready

[jwd]

Still available - ready now!

[Bguetter]

Yes, still available. PM sent

[jwd]

Yes, still available. PM sent

Sent PM please call

[Robert8198]

Give me a call if you still have the car available for sale. I live fairly close.

Robert @ 865-657-9220

[awd-turbo]

If it falls through, I have cash and I am interested.

[pcsguy]

Still Available??

[Dru10290]

I need to free up some cash for business expansion so i'm putting my 289 kit up for sale.

It's a 289 FIA complete kit and in the roller chassis stage with no motor or transmission installed. Barely started wiring, harness is just roughly layed out.

289 Complete kit
3-link
powdercoated chassis
oil cooler kit
vintage low back race seats
wind wings
assembled side louvers
battery cutoff switch
external battery post
extra competition mirror
FIA Trunk
FFR 15" halibrand replica wheels with Hoosier tires mounted/balanced
FFR Rear brake kit
Breeze front battery mount

Completely rebuilt 8.8 rear end. 31 spline axles, new 31 spline diff, new 3.55 gears, new bearings, seals, etc. aluminum diff cover

I bought a rebuilt 306 short block new from Creb Engineering with a TFS stage 1 cam installed ($1700) and was going to build up the motor myself. I can include this in the sale as well.

This is my second FFR build.

Not a great build thread, but a few more pictures can be found here---> http://thefactoryfiveforum.com/showt...X-2323-Tribute

Rough estimate i have $24,000 into it. I’m asking $20,000. Open to reasonable offers. I'm located in Louisville, KY.

Still Available??