Midwest Classic Insurance

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 7 of 7

Thread: HELP!! Just got unfinished project for GTM supercar

  1. #1
    Junior Member
    Join Date
    Dec 2017
    Posts
    3
    Post Thanks / Like

    HELP!! Just got unfinished project for GTM supercar

    Hi all.. im Kris from Indonesia.. i just bought GTM supercar gen I from my friend.. but he was die..

    I dont understand to build this car and what parts left to build completely..

    Now im going to move the pedals and steering side from left to rhd..

    I didnt get the steering column.. does anyone ever use aftermarket or universal steering column that fit to this car and fit for the electrical switch?

    Theres so many parts to buy.. i just get the chassis, body, and engine.. (here i cant upload the pic.. dont know how to upload)..

    For now i need parts like :
    Steering column
    All glasses
    Power window
    Power steering (should i use power steering? Front wheight is light enough if no power steering)
    It seems lost for the fork transmission parts

    The engine type is LS 1 with 12559378 casting code..

  2. #2
    Senior Member beeman's Avatar
    Join Date
    Feb 2011
    Location
    Indiana
    Posts
    1,485
    Post Thanks / Like
    MK3.1 2004 Mach 1 donor. ABS, PS, TC.
    GTM #304 LPE 525hp LS3
    2000 C5 Lingenfelter LS1@489hp
    1999 Corvette FRC/Z06 track car

  3. #3
    Junior Member
    Join Date
    Dec 2017
    Posts
    3
    Post Thanks / Like
    I just bought the manual.. but it doesnt explain for other option.. only from c5 corvette donor parts..

    Have u ever use aftermarket / universal parts for the steering column?

  4. #4
    Banned
    Join Date
    Aug 2011
    Posts
    669
    Post Thanks / Like
    I'd use the c5 corvette steering column if you can get one. You could use another steering column but you'd have to make the mounts and figure out the connection to the steering rack.

  5. #5
    Senior Member
    Join Date
    Feb 2011
    Location
    North Bay, Ontario
    Posts
    128
    Post Thanks / Like
    My best suggestion is to read a lot of the threads/posts on this forum. read through manual and educate yourself on this car before jumping into this build. You should have all the glass with the kit. might be a good idea to go though all the parts to ensure you have everything that comes with the kit, then work on the list of donor parts you need.
    Team Bouffard
    GenII #369 - SOLD
    1968 Camaro - work in progress

  6. #6
    Administrator David Hodgkins's Avatar
    Join Date
    Feb 2011
    Location
    Corona del Mar, CA
    Posts
    6,057
    Post Thanks / Like
    Blog Entries
    7
    Kris,

    I updated your account so you can edit your profile and upload pictures to the gallery.

    Check out this thread for tips on how to embed pictures:
    http://thefactoryfiveforum.com/showt...tures-in-posts


    FFR 5369 Pin Drive, IRS, Trigos, Torsen, Wilwoods, FMS BOSS 302 "B" cam , Mass-flo. CA SB100 (SPCN) Registered
    Delivered 4/23/06. "Finished" 4/2012 (still not done!)


  7. #7
    Senior Member beeman's Avatar
    Join Date
    Feb 2011
    Location
    Indiana
    Posts
    1,485
    Post Thanks / Like
    Here's how I used an EPS unit, was easy to tie into the rack.

    http://thefactoryfiveforum.com/showt...l=1#post267596
    MK3.1 2004 Mach 1 donor. ABS, PS, TC.
    GTM #304 LPE 525hp LS3
    2000 C5 Lingenfelter LS1@489hp
    1999 Corvette FRC/Z06 track car

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor