Visit our community sponsor
Thanks:
0
Likes:
0
-
Air Filter Options
Hey Guys,
I have done a lot of searching on this, but just want to verify. I have the oval cobra air filter. Are my only two options for air filters the K&N or the S&B? I currently have the 1.8 inch filter in there, but would like a taller one.
Thanks!
Scottie
-
Senior Member
I had that same oval air filter in my Mk3 build with a 302 size SBF. I used a KNN-E-1963. 3-inches tall. They apparently don't breathe very well with the short filter. If you have room, this one works.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Originally Posted by
edwardb
I had that same oval air filter in my Mk3 build with a 302 size SBF. I used a KNN-E-1963. 3-inches tall. They apparently don't breathe very well with the short filter. If you have room, this one works.
Thanks! I’ll have to measure to see if the 3 inch tall one will fit.
-
The 3 inch will be a tight fit. Calling S&B today to see which part number is the 2.5 inch tall filter
-
Junior Member
I am using the s&B 2.5 with the cobra Dual to single Airfilter assembly avail from branda. It's a tight fit but works well. DSCF1673.JPG
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor