FormaCars

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 16 of 16

Thread: How to Know the dry sump pump is still running

  1. #1
    Senior Member Rob T's Avatar
    Join Date
    Feb 2016
    Location
    Woodruff, SC
    Posts
    502
    Post Thanks / Like

    How to Know the dry sump pump is still running

    Hi: I am looking for some innovative solutions. My dry sump pump is driven by a micro-groove v-belt. It is a scavenge only system that returns the oil through a cooler into a tank. The tank gravity feeds the OEM oil pump and filter system. If, at some point, the belt breaks or something happens to the pump, the engine will flood with oil and something bad will happen. Regular checking of the belt is key, but I am looking for warning of a catastrophic failure. An "idiot light" of sorts. I have a few ideas, but would like some thoughts on the details of their implementation.

    1) Some sort of sensor that detects rotation of the pump drive pulley. This could be linked to an indicator light on the dash.
    2) A pressure switch on the discharge side of the pump. This would have to be relatively low pressure, I think, but could be linked to the a light on the dash. This would indicate oil was returning from the pump to the tank.
    3) A level switch in the tank - this could be done a number of ways...but would indicate all the oil was gone...

    Any other ideas from this smart group. I get the concept that checking the checker makes things more complicated and, in general, simple is better. I am trying to evaluate if the "insurance" is worth it.

  2. #2
    Senior Member
    Join Date
    Nov 2017
    Posts
    765
    Post Thanks / Like
    You could use a switch to detect the position of a belt tensioner (or similar device).

    If the belt is not in place - the tensioner moves and turns on an idiot light.

  3. #3
    Senior Member Gromit's Avatar
    Join Date
    Dec 2015
    Location
    Mass, North of Boston
    Posts
    170
    Post Thanks / Like
    I would look to the automation/motion control industry. they make "rate" sensors You would want one that you can set the a minimum number of pulses per time and if the sensor is not getting those pulses it goes on. the sensor could be optical and look through holes in a pulley or say magnetic and have a magnet attached to the pulley to create the rate pulse I am thinking something like this... http://www.eaton.com/Eaton/ProductsS...dex.htm#tabs-2

    I've never done it but figured if I had a dry sump this is what I would do. just my .02
    Chris

  4. #4
    Junior Member
    Join Date
    Feb 2011
    Posts
    19
    Post Thanks / Like
    Rob T, just a thought, when I was in stock cars, we lost a few motors when the oil thickened and couldn't get through the cooler. Learned that we had to route the oil from the pump to the filters then the cooler.
    Jim

  5. #5
    Senior Member DSR-3's Avatar
    Join Date
    Oct 2015
    Location
    San Jose, CA
    Posts
    386
    Post Thanks / Like
    Thru-beam or reflective optical sensor (Omron)?
    *It always scared me to see the belt walking back and forth on the 1 pulley without flanges (2 different systems), but never had one come off!

  6. #6
    Member
    Join Date
    Mar 2017
    Location
    SW Ontario
    Posts
    52
    Post Thanks / Like
    You could use a camshaft sensor (or similar type) to monitor the pulley of the oil pump. As long as the pulley rotates, you should have pressure. Of course, a more direct indicator would be a pressure switch.

  7. #7
    Senior Member Rob T's Avatar
    Join Date
    Feb 2016
    Location
    Woodruff, SC
    Posts
    502
    Post Thanks / Like
    Great input. Thanks. Keep them coming. Looks like a few good options.

  8. #8
    Senior Member Bob_n_Cincy's Avatar
    Join Date
    Sep 2012
    Location
    Cincinnati OH
    Posts
    3,903
    Post Thanks / Like
    I was thinking about adding a GM oil level sensor to me dry Sump Tank. I haven't done it yet.
    Bob


    https://www.rockauto.com/en/moreinfo...431138&jsn=587
    818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
    My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
    My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread

  9. #9
    Senior Member
    Join Date
    Feb 2015
    Location
    Reno, NV
    Posts
    191
    Post Thanks / Like
    I've been looking for an inexpensive level sensor that would work in a DS tank. I have my doubts about the reliability of a float switch since the flow through the tank will be high and could keep it from working correctly. Might get a false low level indication if the side ways flow pushes the float down.
    Gill makes capacitive sensors used in high end racecars, with a high end price tag. https://www.gillsc.com/products/level-sensors/

    Seems to me that the pressure transducer on the scavenge pump outlet is the low cost option most likely to work. I think I'll try that first, unless one of you guys does it first and it doesn't work.
    818R Build date 10/31/15

  10. #10
    Senior Member Bob_n_Cincy's Avatar
    Join Date
    Sep 2012
    Location
    Cincinnati OH
    Posts
    3,903
    Post Thanks / Like
    Quote Originally Posted by DanielsDM View Post
    Seems to me that the pressure transducer on the scavenge pump outlet is the low cost option most likely to work. I think I'll try that first, unless one of you guys does it first and it doesn't work.
    The output of the scavenge pump will be a very low pressure as it is open to the atmosphere through the breather tank.
    Bob
    818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
    My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
    My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread

  11. #11
    Senior Member
    Join Date
    Feb 2015
    Location
    Reno, NV
    Posts
    191
    Post Thanks / Like
    The pressure transducer would need to have a low enough range to differentiate the signal from the noise. Maybe 0-10 or 0-20 psi. I don’t have any data yet so won’t know what the value is until I try it.

    A vacuum transducer in the crankcase could also be used to determine if the scavenge pump is running IF the pump flows enough to pull vacuum with the blow-by that happens when the engine is under boost.
    Last edited by DanielsDM; 01-14-2018 at 11:49 AM. Reason: Typo
    818R Build date 10/31/15

  12. #12
    Sgt.Gator's Avatar
    Join Date
    Apr 2013
    Location
    Bend, Oregon
    Posts
    1,652
    Post Thanks / Like
    Another reason for a Vacuum/Boost sensor in the balance hose system if you are running a closed system. Besides telling you the pump is pulling a vacuum and how much, or failing to pull a vacuum and now you have positive pressure from blowby, it could also be set as an alarm to light a red light if it goes positive period. The only way it can go positive is either the pump is not pulling enough vacuum or is not working at all. Under either condition you'd want to alarm on it to avoid filling the engine with a DS tank full of oil or blowing out the seals from too much crankcase pressure.

    On an open-vented system, you'd have to think of something else. In my LGT I had the DS tank mounted in the passenger seat area to the door cage bars. I always listened for the sound of the oil pulsating in the tank, "sloshing" sound. And in my STI the AN lines run thru the cockpit to the tank in the trunk. Again, I can hear the pulsating oil in the lines, and see the lines wiggle a bit from it. However I doubt I would notice in time to save things in a race if the sounds and wiggling stopped.
    "Good Judgement comes from Experience. Experience comes from Bad Judgement"
    Owner: Colonel Red Racing
    eBAy Store: http://stores.ebay.com/colonelredracing
    818R ICSCC SPM
    2005 Subaru STI Race Car ICSCC ST and SPM
    Palatov DP4 - ICSCC Sports Racer

  13. #13
    Senior Member DodgyTim's Avatar
    Join Date
    Apr 2013
    Location
    Brisbane, Australia
    Posts
    289
    Post Thanks / Like
    A hall effect tachometer could give a rpm readout for about $20
    https://www.amazon.com/DIGITEN-Digit.../dp/B00VKAT8A2
    It doesn't give an idiot light output though

  14. #14
    Senior Member
    Join Date
    Jun 2015
    Posts
    678
    Post Thanks / Like
    It would just be way easier to do if one belt ran both the alternator and the DS pump.

  15. #15
    Senior Member Bob_n_Cincy's Avatar
    Join Date
    Sep 2012
    Location
    Cincinnati OH
    Posts
    3,903
    Post Thanks / Like
    Quote Originally Posted by RetroRacing View Post
    It would just be way easier to do if one belt ran both the alternator and the DS pump.
    Implementing one belt would be easy like you said.
    Bob
    belts2.jpg

    belts3.jpg
    818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
    My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
    My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread

  16. #16
    Senior Member
    Join Date
    Jun 2015
    Posts
    678
    Post Thanks / Like
    Then you just need to run a wire from the alternator to one side of a dash light, and one from switch power to the other side of the light, light will come on when the engine is off or the alternator stops working (aka belt is off).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor