Visit our community sponsor
Thanks:
0
Likes:
0
-
Front Coilover Mount Hole Selection For Mk4 Roadster
Can someone confirm which is the correct mount hole for the front Koni Coilovers on the Mk4 Roadster? (see attached photo)
The manual (on page 93) instructs to "fasten the shock to the top mount with fasteners and 0.675" spacers provided and torque both upper and lower mounts to 40 ft-lbs".
Most of the photos I've scoured on this forum show 1 hole, so is the obvious upper really the upper?
Comments on why there are two upper mount holes are welcomed.
My specs: I am using a 1994 Ford stock lower control arm (modified as per manual, using the inner bolt holes), FFR upper arm (as supplied in base kit) and the FFR Koni Front Coilovers.
Koni Mount 1.jpg
-
-
That thread didn't help much. I spoke with FFR, and the lower of the upper mount holes are for the standard red Konis, whereas the the upper mount hole is for the silver bodied dual adjustable Koni’s.
-
Senior Member
Originally Posted by
Canuk14
That thread didn't help much. I spoke with FFR, and the lower of the upper mount holes are for the standard red Konis, whereas the the upper mount hole is for the silver bodied dual adjustable Koni’s.
Actually the answer you received from FFR is what I said in post #3 of that thread. Admittedly, it was an educated guess. But good to know that was it.
Last edited by edwardb; 01-23-2018 at 07:53 AM.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor