BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Front UCA ball joint....

  1. #1
    Senior Member ClemsonS197's Avatar
    Join Date
    Feb 2011
    Location
    Marietta, GA
    Posts
    346
    Post Thanks / Like

    Front UCA ball joint....

    The ball joint on the drivers side fit fine, but the passenger side is about 1/10" less engaged so the cotter pin hole is blocked by the castle nut with the washer. If I remove the washer it works. Is the washer necessary, or should I get a thinner washer? I pushed the boot out of the way to get a look from the top, and it's definitely fully seated. SN95 spindles if that matters. Thanks.
    MK3.1 #7076 - Under Construction....
    Coyote 5.0/Solid 8.8/Tremec 3650
    How to:
    Coyote Power Steering
    05-09 T3650 in a Roadster

  2. #2
    Senior Member riptide motorsport's Avatar
    Join Date
    Feb 2011
    Location
    Fort Lauderdale Fl.
    Posts
    3,296
    Post Thanks / Like
    try a thinner washer first.
    FFR Daytona Type 65 Coupe
    67 427 Cobra
    57' Belair
    72 Pinto Wagon ,306" 1/4 miler
    34 5 window coupe Ford
    2003 Mustang GT
    99' ZX9
    85 Goldwing

    All toys still in the Scuderia!


    Every Saint has a past..................every sinner a future

    Don't take yourself so seriously........no one else does.

    You never see a motorcycle parked outside a Psychiatrists office.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor