Anyone else ready to update their status on our 33 owners map? Reply below..
You can probably change mine (#1214) to complete.....I just have one door panel to install and the trunk carpet to install and that's it so pretty much complete.
You can probably change mine (#1214) to complete.....I just have one door panel to install and the trunk carpet to install and that's it so pretty much complete.
Jim
Done! We'll let it slide They're NEVER DONE!
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100
Please move #0998 from Nederland, Texas to Village Mills, Texas
Thanks,
Andy
33 Hot Rod (Gen 1) Stage 1 delivered on 4/27/2017, Stage 2 delivered on 9/21/2018
LS3 495hp/480 lb. ft., 4L70E, Electric PS, Classic Auto Air, Lokar electronic sport shifter, 13 inch Wilwood front and 11.68 Cobra rear brakes, Ford 8.8 w 3.73 w 4 link, Billet Specialty Legend Series MAG wheels and Mickey Thompson
Sportsman S/R 26x8x18 front and 29x18x20 rear tires.
Please move #991 from Evans, GA to Pooler, GA (near Savannah). Decided to retire a little early. Work-Life balance was out of balance and COVID changed my focus. So, wife and I downsized and moved. Now, more time for the wife, the hot rod, and life.
Please move #991 from Evans, GA to Pooler, GA (near Savannah). Decided to retire a little early. Work-Life balance was out of balance and COVID changed my focus. So, wife and I downsized and moved. Now, more time for the wife, the hot rod, and life.
Sounds like fun, congratulations! You have been moved on the map..
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100
Please move #991 from Evans, GA to Pooler, GA (near Savannah). Decided to retire a little early. Work-Life balance was out of balance and COVID changed my focus. So, wife and I downsized and moved. Now, more time for the wife, the hot rod, and life.
I've been retired nine-years now and it's the best thing I've done in my career. Can't believe it, but I'm busier than ever in retirement. I'll work until I die but it won't be for some corporation, it'll be doing what I want to do and on my schedule.
Good luck and I think you made the right choice.
Dart Little M 406" SBC 800 HP N/A & 1,100 HP on nitrous, 2-spd Powerglide with trans brake, 6,000 RPM stall converter, narrowed Moser 88 3.90:1 spool with 35-spline gun-drilled axles & Torino bearings, custom parallel four-link, custom tube chassis & roll cage NHRA certified for 8.5-sec (only two FFR Hot Rods have this cert).
Same here, retired early to do what I wanted to do.
I don’t know how I had time to work before. I don’t have time to update my build.
'33 Hotrod, #1047 Gen 1, delivered on 2/27/18, go cart on 9/24/18.
LS3 w/Gearstar Level 3 4L65e Tranny, Yank converter, Lokar shifter, Electric PS, Vintage AC/Heat/Def, 8.8" 3.55
TorqThrust II Wheels w/Toyo Proxy T1 Sport Tires, F 235/45ZR17 R 295/35ZR18
Garage Built, Driveway Painted.
Damn, ... for a second I thought there was one in my country!! Hahaha
Nederland does have a very strong Dutch heritage as you can imagine and there is even a grondzeiler in old downtown.
33 Hot Rod (Gen 1) Stage 1 delivered on 4/27/2017, Stage 2 delivered on 9/21/2018
LS3 495hp/480 lb. ft., 4L70E, Electric PS, Classic Auto Air, Lokar electronic sport shifter, 13 inch Wilwood front and 11.68 Cobra rear brakes, Ford 8.8 w 3.73 w 4 link, Billet Specialty Legend Series MAG wheels and Mickey Thompson
Sportsman S/R 26x8x18 front and 29x18x20 rear tires.
Please move #991 from Evans, GA to Pooler, GA (near Savannah). Decided to retire a little early. Work-Life balance was out of balance and COVID changed my focus. So, wife and I downsized and moved. Now, more time for the wife, the hot rod, and life.
Make that two of us.
33 Hot Rod (Gen 1) Stage 1 delivered on 4/27/2017, Stage 2 delivered on 9/21/2018
LS3 495hp/480 lb. ft., 4L70E, Electric PS, Classic Auto Air, Lokar electronic sport shifter, 13 inch Wilwood front and 11.68 Cobra rear brakes, Ford 8.8 w 3.73 w 4 link, Billet Specialty Legend Series MAG wheels and Mickey Thompson
Sportsman S/R 26x8x18 front and 29x18x20 rear tires.
Nederland does have a very strong Dutch heritage as you can imagine and there is even a grondzeiler in old downtown.
The replica is more of a "korenmolen", the wings are not close to the ground as a "grondzeiler" (these are typical for pumping purposes in remote areas). The korenmolen had its wings elevated so acces to the windmill was a lot safer!
We have a korenmolen still in the middle of my village, it is being renovated at the moment, but when it is working you can buy flour milled by it for pancakes and some of the local bakers use it for "molenbrood".
Would you change my address to: 9618 Wildwood Ridge, San Antonio, TX 78250 for #490 (Gen 1).
And I'm at about 90% completion. Just trying to get a new headlight so I can start the title dance at DPS!
Would you change my address to: 9618 Wildwood Ridge, San Antonio, TX 78250 for #490 (Gen 1).
And I'm at about 90% completion. Just trying to get a new headlight so I can start the title dance at DPS!
Thanks!
Nice - I've moved you Mike. Good luck
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100
An update: Yep, the map is gone. I spoke to Geoff (the original creator) and he can't see it either. No-one knows why ¯\_(ツ)_/¯
So our only option is to recreate from scratch using this thread, which will take some time and I'm not sure it's worth it. I loved having it and updating it but we only had ~dozen updates in the last year.. and we have no idea how many people ever looked?
I'm guessing we should unpin this?
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100
I'm sad to see our map is gone, too. I was just checking and was going to change my mileage to 12,500 since 2009. I've not driven it as much in recent years but will be adding 2400 miles come June on the Hot Rod Power Tour (middle South route).
It's hard to imagine there are 1100+ kits out there when mine is #007!
Keep working and get them On The Road! 33_Last_Open_Road.jpg
Thanks: 
Likes: 
Originally Posted by Papa_Jack
You can change me, #991, to Go Kart!
Reply With Quote
They're NEVER DONE!
