-
Senior Member
Mike Everson fan shroud mounting ?
I've got the fan attached to the shroud but now the inner nuts to hold the shroud to the radiator are not accessible because the fan is in the way. Anyone using this shroud, how did you do it? I can only think of putting 10-32 rivnuts on the shroud through a washer on the crush side.
IMG_20230203_152847_hdr.jpg
33 Hot Rod Stage 1, Gen.2 ordered 11/11/2021 started June 12, 2022, LS3 E-Rod crate engine, Tremec TKX, 8.8 WITH 3.55 Ratio and limited slip with 31 spline axles.17X8 and18x10 Race Star wheels wrapped in Conti Extreme contact DWS tires, Mustang Cobra brakes all around. Electric PS and AC. Hard top, electric windows and bike fenders. First Start 5/31/2023. Go-Kart 6/2/2023.
-
Either nutserts or just 3/16 rivets. One in each spot.
Mike
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Senior Member
Nutserts it is. All done, thanks guys! Backed up thin shroud with 18 gauge aluminum squares and JB Weld on the nutserts. I spaced it up from the rad using cereal box thick cardboard to keep it from rubbing on the rad from vibration. So I'm anal. I try to prevent future problems when I can.
33 Hot Rod Stage 1, Gen.2 ordered 11/11/2021 started June 12, 2022, LS3 E-Rod crate engine, Tremec TKX, 8.8 WITH 3.55 Ratio and limited slip with 31 spline axles.17X8 and18x10 Race Star wheels wrapped in Conti Extreme contact DWS tires, Mustang Cobra brakes all around. Electric PS and AC. Hard top, electric windows and bike fenders. First Start 5/31/2023. Go-Kart 6/2/2023.
-
Post Thanks / Like - 0 Thanks, 1 Likes
Thanks: 
Likes: 
Reply With Quote
