OK, so I installed power steering, the pump has the stock pulley, I have the FMS underdrive pully set (2.5" alternator pulley), I tried the K060695 (13/16" x 70"
) belt too small and then tried the K060705 (13/16" x 71 1/8") and too large, looks like there are only 2 belt in between, a K060696 (13/16" x 70 1/4) and K060703 ( 13/16" x 70 7/8), so either way it's only a little over 1/4 inch difference and not sure this is enough, any thoughts/options?