Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: exhaust help needed

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Location
    clintondale ny
    Posts
    13
    Post Thanks / Like

    exhaust help needed

    the right side muffler goes at a upward angle so the rear of the muffler is higher then the floor . I have moved the down tube every way possible I ground the bell housing that did not help . I switched pipe that the muffler goes on from the left side to right side and the same thing happens the left side fits perfect and the right side goes at the upward angle it seems to me that the down tube is to long has any body else had this issue.

  2. #2

    Join Date
    Feb 2011
    Location
    Norton, MA USA earth
    Posts
    3,325
    Post Thanks / Like
    Can you post some pictures of your install? I have not seen this problem on the 4 cars I have built. Maybe there is something wrong with the header and not the exhaust pipe?
    Mike

  3. #3
    Mark Dougherty's Avatar
    Join Date
    Feb 2011
    Location
    Hershey PA
    Posts
    722
    Post Thanks / Like
    yes
    I ran into this also.
    I ended up having the wrong pipes shipped to me from FFR ( 2 of the same left side pipes ) I gave them a ring and was told the kit was to old to replace the part for free but I could purchase a new one.
    I understood it was years after the kit was originally sold.
    I decided it was easier to cut and reweld the pipe at the correct angle. no biggy.
    The traveling Builder
    717-773-5624

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor