Are there more detailed instructions for the wilwood brake pedal pushrod and balance rod adjustments that work best? Def want to get this one right or close now as it appears to be difficult later.
Visit our community sponsor
Are there more detailed instructions for the wilwood brake pedal pushrod and balance rod adjustments that work best? Def want to get this one right or close now as it appears to be difficult later.
http://www.wilwood.com/TechTip/TechPedalTip.aspx
Center it up like the instructions say, and make sure to provide the clearances as shown. That will get you through final assembly, bleeding, test drives, etc. You may need to adjust the front/rear bias, but you won't know until you drive it.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
make an access panel on the top of the foot box to the brake bias
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
Has anyone used the remote bias adjuster that Wilwood sells?
http://www.wilwood.com/Pedals/PedalP...temno=340-4990
I'm interested in that part too.
Would be nice to have it mounted where you could fine tune the front and rear bias from the driver's seat.
Anyone, Anyone, Anyone?
https://youtu.be/uhiCFdWeQfA?list=RDuhiCFdWeQfA
Last edited by GoDadGo; 09-16-2017 at 01:48 PM.
IMG_0404.JPG
Poor picture but you can see the blue knob behind the steering wheel.