Visit our community sponsor

View RSS Feed

Recent Blogs Posts

  1. Any recomendations for a supercharger

    Hi all,
    I am thinking of installing a supercharger on my MK3 roadster, which has the following set up:

    302 ( currently producing 340HP)
    Holley street avenger 570 carb
    Forged pistons
    Edlebrock performer intake
    Ford Racing X cylinder heads
    9:0:1 compression

    The one I am leaning towards is the Weiand 174.

    Do any members have any experience with this make, installation tips or are there other super chargers out there ...
  2. Door sills not setting down on frame

    Quote Originally Posted by AJT '33 View Post
    Quote Originally Posted by 60's Kid View Post
    Just put body on for first time. Measured and bolted down at rear wheel wells as per manual. The door sills do not set down on the frame in that door area. Even when pushed down the fiberglass is not down flush against the frame. Am I doing something wrong.
    It will never be right down onto the frame as one of the vertical variables is how you install the firewall relative to the frame. Regardless, what I had done with mine based on conversations with Tony Zullo and others is #1-
  3. Factory Five Forum POM Submission

    Quote Originally Posted by RR20AC View Post
    Factory Five Forum POM Submission
    FFR Number
    Description of Setting
    This photo was taken at Dirtfish Rally School in Snoqualmie, WA. It was around 10:00pm during the time of the shoot. This image is made up of around 10 different pictures all composited into one final image in Adobe Photoshop. There are different exposures to light up the front, side, wheels, and interior of the car as well as exposure for the background. The car was lit up using a light wand and
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Toyo Tires Shelby Cobra3 crop.jpg 
Views:	143 
Size:	1.41 MB 
ID:	90851   Click image for larger version. 

Name:	Toyo Tires Shelby Cobra3 (3).jpg 
Views:	113 
Size:	1.85 MB 
ID:	90852  
  4. Spare tire mount 65 coupe

    On the original 65 coupe it was required to carry a spare tire. Has anyone made a mount for it? I made one and would like to compare
  5. Coyote Wiring

    Quote Originally Posted by Straversi View Post
    Once the engine is in, there is very little room to work, so it depends on how you want to route the wiring and how you want to mount the power distribution box, etc. EduardB installed the motor, marked out locations for everything, pulled the motor, wired it up and then dropped the motor and trans back in. I didn't have the help or desire to do it twice so I shamelessly copied his locations and hoped I could get it pre wired and drop the motor in once. I pulled it off but that engine fits in
Page 1 of 84 1231151 ... LastLast

Flat Irons Tuning

Visit our community sponsor