Visit our community sponsor
All mine were cracked... Replaced both heads... Didn't want to find out I had an issue later
FFR 1879, Blown DSS 306,REDLINE management, VeryCoolParts Tuned 460RWHP
FFR 818S, The Flash, Chassis #5, 2.0L, LSD, Electromotive TEC-S, VCP Tuned, 278RWHP 265 RWTQ
FFR 6651, Green Lantern, 408W Crate, Hellion 66mm Turbo, JGS Waste gate / Blowoff valve, Tec-GT management, VCP Tuned, 575 RWHP, 690 RWTQ
FFR 8335, Black Mamba, 289 FIA CSX 2001 tribute car, 347, 48 IDA webers, VCP Tuned, 311 RWHP 386 RWTQ, 3-link, Trigo's
FFR 0004, Gen 3 , Hawk Coupe, Coyote twin turbo, 683 RWHP 559 RWTQ, IRS, VCP Tuned. "not too shabby"
US ARMY Maintenance Test Pilot (CW4 Retired)
It does look cracked, that yellow line of coolant, clean that up and see if its a crack.
Capture.JPG
Last edited by longislandwrx; 10-22-2013 at 10:33 AM.
A well stocked beverage fridge is the key to any successful project.
Any interest in a South Western AZ located 818 Roller?
http://thefactoryfiveforum.com/showt...-in-Phoenix-AZ
B
What are you looking to get from it?
:-(
818S - #67 (SOLD IT!)
Delivered: 18 November 2013
Go Karted: 29 December 2013
Titled/Registered: 28 March 2014
Finished: NEVER!
341 hp @ 4844 RPM / 389 tq @ 3717 RPM
:-( X2 I saw Brian's 818 just after it was delivered and also saw the nice work he had done restoring donor parts. A good opportunity for someone!
818S/C : Chassis #25 with 06 WRX 2.5 turbo, ABS, cruise, PS, A/C, Apple CarPlay, rear camera, power windows & locks, leather & other complexities. Sold 10/19 with 5,800 miles.
Mk3 Roadster #6228 4.6L, T45, IRS, PS, PB, ABS, Cruise, Koni's, 17" Halibrands, red w/ silver - 9K miles then sold @ Barrett-Jackson Jan 2011 (got back cash spent).
Looks like FFR is working through the list of backorders. I got 2 LARGE boxes in the mail...
Carbon Fiber, Door Skins...all parts are in.
If anyone is interested in purchasing a 818 kit with all donor parts, except engine...just send a PM.
---
Brian