Visit our community sponsor
Tim, do these replace the bronz ones that come with the kit? Do they work with the supplied shoulder bolts and the ones you make?
Thanks,
Doug
Doug,
Yes, they replace the bronze ones from the kit. I can supply them to fit the trunk and hood with my stainless steel bolts but the doors have to use the factory supplied bolts as I can't source a reasonably priced precision stainless shoulder bolt.
I custom fit each bushing to the bolts and there isn't the excess clearance between the bolt and bushing experienced with the bronze units. In addition, because my parts are a two part bushing, the bearing surface is greater by 200 - 400 % on most parts.
Pricing and shipping are on my web site: kootenaivalleycustoms.com
Thanks,
Tim Whittaker
Kootenai Valley Customs
Last edited by Tim Whittaker; 09-12-2013 at 06:09 PM.
Hey Tim. Do you have a contact number so I can call you?
Bruce
Georgia
Didn’t Tim retire a year or so ago?
'33 Hotrod, #1047 Gen 1, delivered on 2/27/18, go cart on 9/24/18.
LS3 w/Gearstar Level 3 4L65e Tranny, Yank converter, Lokar shifter, Electric PS, Vintage AC/Heat/Def, 8.8" 3.55
TorqThrust II Wheels w/Toyo Proxy T1 Sport Tires, F 235/45ZR17 R 295/35ZR18
Garage Built, Driveway Painted.
I think I may have bought his last bumpsteer kit.
I probably have his phone number somewhere as I talked with him about the kit before I bought it.
'33 Hotrod, #1047 Gen 1, delivered on 2/27/18, go cart on 9/24/18.
LS3 w/Gearstar Level 3 4L65e Tranny, Yank converter, Lokar shifter, Electric PS, Vintage AC/Heat/Def, 8.8" 3.55
TorqThrust II Wheels w/Toyo Proxy T1 Sport Tires, F 235/45ZR17 R 295/35ZR18
Garage Built, Driveway Painted.