We've been getting some good work done. Thought I'd share one fun thing and one that might be useful to folks.

1. Since Wayne neglected to include a cool VCP sticker with my AWIC, I decided to make my own.

IMG_1075.jpg

Since I got chassis number 86 I had to include a Get Smart reference somewhere on the car.

2. There has been a few discussions about the fiberglass vs. aluminum tabs in the back used for the hood pins or latches for the rear cover. I didn't like the stiffness in either of the included options so I made some plates that hold Quik Latch buckets. The plates are attached to both the rear and side fiberglass so they are much more stiff than the tabs. Here are some pictures of what I did:

IMG_1076.jpg IMG_1078.jpg

Our punch list is getting shorter by the work session. I think we will be done with the exception of bodywork and paint with just a handful more building sessions.

Larry