Quote Originally Posted by STiPWRD View Post
Bob, have you ran the engine since doing this intake mod? Putting a bend right in front of the MAF (picture 2) will really mess up the reading and cause you to run very rich. I've done this before too (put a 90 degree bend right in front of where the MAF was) and couldn't figure out why the car ran so rich even after removing tons of fuel from the map. The MAF needs to have straight laminar air flow to work properly.

Hi STiPWRD,
My MAF and AIT is still between the air filter turbo. We just used an extra housing before the air filter.
Bob

P1050842s.jpg